Core Molding Technologies Announces Timing of First Quarter Fiscal 2025 Results
- COLUMBUS, Ohio., April 28, 2025 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America, today announces that it will release its first quarter fiscal 2025 results on Thursday, May 8, 2025, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.
- 04/28/2025
|
Core Molding Technologies, Inc. (CMT) Q4 2024 Earnings Call Transcript
- Core Molding Technologies, Inc. (NYSE:CMT ) Q4 2024 Results Conference Call March 11, 2025 10:00 AM ET Company Participants Sandy Martin - Three Part Advisors Dave Duvall - President and Chief Executive Officer John Zimmer - Chief Financial Officer Conference Call Participants Chip Moore - Roth MKM Bill Dezellem - Tieton Capital Operator Good morning, everyone. Welcome to the Core Molding Technologies Fourth Quarter and Full Year Fiscal 2024 Financial Results Conference Call.
- 03/11/2025
|
Core Molding Technologies Announces Timing of Fourth Quarter and Fiscal Year 2024 Results
- COLUMBUS, Ohio, Feb. 12, 2025 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America, today announces that it will release its fourth quarter and fiscal year 2024 results on Tuesday, March 11, 2025, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.
- 02/12/2025
|
Western Union Q4 Earnings Miss Estimates on CMT Revenue Decline
- WU's Q4 results reflect reduced Iraq contributions and a decline in CMT revenues, partly offset by revenue growth in the CS segment and a lower expense level.
- 02/05/2025
|
Core Molding Technologies to Present and Host 1x1 Meetings at the 16th Annual Southwest IDEAS Conference on November 21, 2024
- COLUMBUS, Ohio, Nov. 14, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding,” “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today announced that David Duvall, President and CEO, and John Zimmer, EVP and CFO, will participate in the 16th Annual Southwest IDEAS Conference in Dallas on November 21, 2024.
- 11/14/2024
|
Core Molding Technologies, Inc. (CMT) Q3 2024 Earnings Call Transcript
- Core Molding Technologies, Inc. (NYSE:CMT ) Q3 2024 Earnings Conference Call November 5, 2024 10:00 AM ET Company Participants Sandy Martin – Three Part Advisors Dave Duvall – President and Chief Executive Officer John Zimmer – Chief Financial Officer Conference Call Participants Chip Moore – Roth MKM Bill Dezellem – Tieton Capital Operator Good morning, everyone. Welcome to the Core Molding Technologies Third Quarter Fiscal 2024 Financial Results Conference Call.
- 11/05/2024
|
Core Molding Technologies (CMT) Surpasses Q3 Earnings and Revenue Estimates
- Core Molding Technologies (CMT) came out with quarterly earnings of $0.36 per share, beating the Zacks Consensus Estimate of $0.23 per share. This compares to earnings of $0.53 per share a year ago.
- 11/05/2024
|
Core Molding Technologies Appoints Alex Bantz as Chief Commercial Officer to Lead Strategic Expansion
- COLUMBUS, Ohio, Oct. 28, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”) announced today that Mr. Alex Bantz has been appointed to the position of Chief Commercial Officer, effective immediately.
- 10/28/2024
|
Will a Weak CMT Unit Impact Western Union's Q3 Earnings?
- Reduced transactions in multiple regions in the CMT segment are expected to have affected WU's results.
- 10/18/2024
|
Thermo Compression Forming Market Global Forecast to 2029, with Leading Player Profiles for Flextech, Janco, Formed Solutions, Core Molding Technologies and More
- Dublin, Sept. 30, 2024 (GLOBE NEWSWIRE) -- The "Thermo Compression Forming Market by Foam Type (Thermoplastic Foam, Needle-Punch Nonwovens, Light Weight Glass Mat Thermoplastic), End-Use Industry (Automotive, Aerospace, Construction, Medical, Electrical & Electronics) - Global Forecast to 2029" report has been added to ResearchAndMarkets.com's offering. The Thermo Compression Forming Market size is projected to reach USD 13.37 billion by 2029 at a CAGR of 4.0% from USD 11 billion in 2024. North America is estimated to account for the largest share in terms of value of the thermo compression forming market in 2024.
- 09/30/2024
|
Core Molding Technologies to Present and Host 1x1 Meetings at the 15th Annual Midwest IDEAS Conference on August 28, 2024
- COLUMBUS, Ohio, Aug. 19, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding,” “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico, today announced that David Duvall, President and CEO, and John Zimmer, EVP and CFO, will participate in the 15th Annual Midwest IDEAS Conference in Chicago on August 28, 2024.
- 08/19/2024
|
Core Molding Technologies, Inc. (CMT) Q2 2024 Earnings Call Transcript
- Core Molding Technologies, Inc. (NYSE:CMT ) Q2 2024 Earnings Conference Call August 6, 2024 10:00 AM ET Company Participants Sandy Martin - IR, Three Part Advisers Dave Duvall - President and CEO John Zimmer - EVP and CFO Conference Call Participants Chip Moore - Roth MKM Operator Good morning, everyone. Welcome to the Core Molding Technologies Second Quarter Fiscal 2024 Financial Results Conference Call.
- 08/06/2024
|
Core Molding Technologies (CMT) Surpasses Q2 Earnings and Revenue Estimates
- Core Molding Technologies (CMT) came out with quarterly earnings of $0.73 per share, beating the Zacks Consensus Estimate of $0.42 per share. This compares to earnings of $0.91 per share a year ago.
- 08/06/2024
|
Core Molding Technologies Announces Timing of Second Quarter Fiscal Year 2024 Results
- COLUMBUS, Ohio, July 17, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America, today announces that it will release its second quarter fiscal year 2024 results on Tuesday, August 6, 2024, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.
- 07/17/2024
|
Are Investors Undervaluing Core Molding Technologies (CMT) Right Now?
- Here at Zacks, our focus is on the proven Zacks Rank system, which emphasizes earnings estimates and estimate revisions to find great stocks. Nevertheless, we are always paying attention to the latest value, growth, and momentum trends to underscore strong picks.
- 06/17/2024
|
Is Core Molding Technologies (CMT) Stock Undervalued Right Now?
- Here at Zacks, our focus is on the proven Zacks Rank system, which emphasizes earnings estimates and estimate revisions to find great stocks. Nevertheless, we are always paying attention to the latest value, growth, and momentum trends to underscore strong picks.
- 05/30/2024
|
Despite Fast-paced Momentum, Core Molding Technologies (CMT) Is Still a Bargain Stock
- If you are looking for stocks that have gained strong momentum recently but are still trading at reasonable prices, Core Molding Technologies (CMT) could be a great choice. It is one of the several stocks that passed through our 'Fast-Paced Momentum at a Bargain' screen.
- 05/24/2024
|
Is Core Molding Technologies (CMT) a Great Value Stock Right Now?
- Here at Zacks, our focus is on the proven Zacks Rank system, which emphasizes earnings estimates and estimate revisions to find great stocks. Nevertheless, we are always paying attention to the latest value, growth, and momentum trends to underscore strong picks.
- 05/14/2024
|
Core Molding Technologies to Participate in the EF Hutton Annual Global Conference in NYC
- COLUMBUS, Ohio, May 08, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today announced that David Duvall, President and CEO, and John Zimmer, EVP and CFO, will participate in the EF Hutton Annual Global Conference at The Plaza Hotel in New York City on May 15, 2024.
- 05/08/2024
|
Core Molding Technologies Reports Fiscal 2024 First Quarter Results
- COLUMBUS, Ohio, May 07, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today reports financial and operating results for the three months ended March 31, 2024.
- 05/07/2024
|
Core Molding Technologies Presented with a 2024 BRP Gold Supplier Award
- COLUMBUS, Ohio, April 16, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding,” “Core” or the “Company”) announced it was presented with BRP's Gold Supplier Award based on excellence in quality, manufacturing, and logistics related to its Sea-Doo boat and personal watercraft models. BRP awards the Gold Supplier Award to suppliers that have provided excellent customer service and technical support.
- 04/16/2024
|
Core Molding Technologies (CMT) Soars 7.5%: Is Further Upside Left in the Stock?
- Core Molding Technologies (CMT) witnessed a jump in share price last session on above-average trading volume. The latest trend in earnings estimate revisions for the stock doesn't suggest further strength down the road.
- 04/16/2024
|
SHAREHOLDER ALERT: Purcell & Lefkowitz LLP Announces Shareholder Investigation of Core Molding Technologies, Inc. (NYSE American: CMT)
- NEW YORK , March 27, 2024 /PRNewswire/ -- Purcell & Lefkowitz LLP announces that it is investigating Core Molding Technologies, Inc. (NYSE American: CMT) on behalf of the company's shareholders. The investigation seeks to determine whether Core Molding Technologies's directors breached their fiduciary duties in connection with recent corporate actions.
- 03/27/2024
|
Core Molding Technologies Promotes Eric L. Palomaki to Chief Operating Officer
- COLUMBUS, Ohio, March 25, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding,” “Core” or the “Company”), announced today that Eric L. Palomaki has been promoted to Chief Operating Officer (“COO”).
- 03/25/2024
|
Core Molding Technologies to Participate in the 36th Annual
- COLUMBUS, Ohio, March 13, 2024 (GLOBE NEWSWIRE) — Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding,” “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today announced that …
- 03/13/2024
|
Core Molding Technologies to Participate in the 36th Annual Roth Conference
- COLUMBUS, Ohio, March 13, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding,” “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today announced that David Duvall, President and CEO, and John Zimmer, EVP and CFO, will participate in the upcoming 36th Annual Roth Conference on March 18-19, 2024 in Laguna Niguel, CA. Investors interested in arranging a one-on-one meeting should contact your conference representative or the Company's investor relations contacts listed below.
- 03/13/2024
|
Core Molding Technologies, Inc. (CMT) Q4 2023 Earnings Call Transcript
- Core Molding Technologies, Inc. (CMT) Q4 2023 Earnings Call Transcript
- 03/12/2024
|
Core Molding Technologies Reports Full Year and Fourth Quarter 2023 Results
- Significant Cash Flow and Improved Returns from Fiscal 2023 Strategic Initiatives Significant Cash Flow and Improved Returns from Fiscal 2023 Strategic Initiatives
- 03/12/2024
|
Core Molding Technologies Announces $7,500,000 Stock Repurchase Program
- COLUMBUS, Ohio, March 11, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico, today announced that its Board of Directors authorized a stock repurchase program of up to $7,500,000 of the Company's issued and outstanding common stock, par value $1.00 per share.
- 03/11/2024
|
Core Molding Technologies Announces Timing of Fourth Quarter and Fiscal Year 2023 Results
- COLUMBUS, Ohio, Feb. 15, 2024 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America, today announces that it will release its fourth quarter and fiscal year 2023 results on Tuesday, March 12, 2024, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.
- 02/15/2024
|
Core Molding Technologies: Beneficial Feedback Loop Builds Foundation For Diversification
- Core Molding Technologies is a company with a leading position in providing products in the thermoplastic and thermoset categories. The company has long-term relationships with major blue-chip companies, giving it a competitive advantage. It has a reverse order for its addressable market and current sales contributor, indicating potential for growth.
- 02/02/2024
|
Core Molding Technologies Presenting at the 15th Annual Southwest IDEAS Investor Conference on November 16th in Dallas, TX
- COLUMBUS, Ohio, Nov. 13, 2023 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today announced that the Company will present at the Southwest IDEAS Investor Conference at 10:05 am CT on November 16, 2023, at The Statler Dallas, and management will also be available for 1x1 meetings that day. The presentation will be webcast and may be accessed through the conference host's main website: https://www.threepartadvisors.com/southwest and in the investor relations section of the company's website: https://coremt.com/investor-relations/events-presentations/.
- 11/13/2023
|
Core Molding Technologies Reports Fiscal 2023 Third Quarter Results
- Strategic Initiatives Continue to Drive Higher Returns and Generate Strong Cash Flow Strategic Initiatives Continue to Drive Higher Returns and Generate Strong Cash Flow
- 11/07/2023
|
Core Molding Technologies Announces Timing of Third Quarter Fiscal 2023 Results
- COLUMBUS, Ohio, Oct. 12, 2023 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America, today announces that it will release its third quarter fiscal 2023 results on Tuesday, November 7, 2023, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.
- 10/12/2023
|
Core Molding Technologies: Margins Are Expanding Quickly
- Core Molding Technologies has seen a significant increase in its share price and has access to a large total addressable market valued at over $10 billion. CMT specializes in the manufacturing of thermoplastic and thermoset structural products, serving diverse markets across various sectors. The company faces some risks related to fluctuating material costs and potential disruptions in its supply chain, but its financials show progress and a strong cash position.
- 09/25/2023
|
Core Molding Technologies, Inc. Mourns the Passing of Esteemed Board Member
- COLUMBUS, Ohio, Sept. 06, 2023 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. is deeply saddened to announce the passing of James F. Crowley, a valued member of our Board of Directors. James Crowley passed away peacefully on August 24, 2023, leaving behind a legacy of leadership and dedication that will forever be remembered.
- 09/06/2023
|
Core Molding Technologies, Inc. (CMT) Q2 2023 Earnings Call Transcript
- Core Molding Technologies, Inc. (NYSE:CMT ) Q2 2023 Earnings Conference Call August 8, 2023 10:00 AM ET Company Participants Sandy Martin - IR, Three Part Advisors Dave Duvall - President & CEO John Zimmer - EVP, Secretary, Treasurer & CFO Conference Call Participants Tim Moore - EF Hutton JP Geygan - Global Value Investment Corporation Operator Good morning, everyone. Welcome to the Core Molding Technologies second-quarter fiscal 2023 financial results conference call.
- 08/11/2023
|
Core Molding Technologies Presenting at the 14th Annual Midwest IDEAS Investor Conference on August 24th in Chicago, IL
- COLUMBUS, Ohio, Aug. 10, 2023 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today announced that the Company will present at the Midwest IDEAS Investor Conference at 9:20 am CT on August 24, 2023, at The Gwen in Chicago, and management will also be available for 1x1 meetings that day. The presentation will be webcast and may be accessed through the conference host's main website: https://www.threepartadvisors.com/midwest and in the investor relations section of the company's website: https://coremt.com/investor-relations/events-presentations/.
- 08/10/2023
|
Core Molding Technologies, Inc. (CMT) Q1 2023 Earnings Call Transcript
- Core Molding Technologies, Inc. (NYSE:CMT ) Q1 2023 Earnings Conference Call May 9, 2023 10:00 AM ET Company Participants Sandra Martin - IR, Three Part Advisors David Duvall - President & CEO John Zimmer - EVP & CFO Conference Call Participants Chip Moore - EF Hutton Operator Good morning, everyone. Welcome to the Core Molding Technologies' First Quarter Fiscal 2023 Financial Results Conference Call.
- 05/14/2023
|
Core Molding Technologies Announces Timing of First Quarter Fiscal 2023 Results
- COLUMBUS, Ohio, April 26, 2023 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America, today announces that it will release its first quarter fiscal 2023 results on Tuesday, May 9, 2023, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.
- 04/26/2023
|
Core Molding Technologies: Financially Sound Stock
- Core Molding Technologies, Inc. recently announced solid Q4 FY22 and FY22 results. Their gross profit margins, net income, and revenues have grown significantly in FY22 compared to FY21, and the management has provided optimistic revenue guidance for FY23.
- 04/13/2023
|
The 7 Most Promising Battery Stocks to Buy in April
- Following the surge in oil prices as the Organization of the Petroleum Exporting Countries (OPEC) and non-member oil-producing nations – an alliance known as OPEC+ – the narrative for the most promising battery stocks to buy in April got even more enticing. With rising fuel prices affecting practically everybody, greater interest will focus on advanced energy solutions.
- 04/05/2023
|
7 Dirt-Cheap Stocks Sitting in the Sweet Spot
- While it's always nice to get a discount, with cheap stocks, it may be better to go for enterprises sitting in the sweet spot; that is, publicly traded securities that are cheap but not too cheap where investors might fret about possible value traps. On this list, I'm only going to target (as of the time of writing) equity shares that trade between $10 and $20.
- 03/23/2023
|
Core Molding Technologies Announces Timing of Fiscal 2022 Fourth Quarter and Year End Results
- COLUMBUS, Ohio, Feb. 22, 2023 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America, today announces that it will release its fiscal 2022 fourth quarter and year end results on Tuesday, March 14, 2023, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.
- 02/22/2023
|
Core Molding Technologies: Turnaround Going Unnoticed Due To COVID-19 And Inflation
- In 2018, the company embarked on an operational turnaround, which led to significant revenue growth and margin improvement. Its long-term goals include reaching annual revenues of $500 million and improving the operating income margin to 10%.
- 02/11/2023
|
Core Molding Technologies, Inc. (CMT) Q3 2022 Earnings Call Transcript
- Core Molding Technologies, Inc. (NYSE:CMT ) Q3 2022 Earnings Conference Call November 8, 2022 10:00 AM ET Company Participants Steven Hooser - Three Part Advisors, LLC Dave Duvall - President and Chief Executive Officer John Zimmer - Executive Vice President and Chief Financial Officer Conference Call Participants Chip Moore - EF Hutton Mike Hughes - SGF Capital JP Geygan - Global Value Investment Corporation Operator Good morning, everyone and welcome to the Core Molding Technologies Third Quarter Fiscal 2022 Financial Results Conference Call. [Operator Instructions] Please note that this event is being recorded today.
- 11/12/2022
|
Core Molding Technologies, Inc. (CMT) CEO David Duvall on Q2 2022 Results - Earnings Call Transcript
- Core Molding Technologies, Inc. (NYSE:CMT ) Q2 2022 Earnings Conference Call August 9, 2022 10:00 AM ET Company Participants Sandy Martin - IR David Duvall - President and CEO John Zimmer - EVP and CFO Conference Call Participants Chip Moore - EF Hutton Jeffrey Geygan - Global Value Investment Corporation Justyn Putnam - Talanta Investment Group Operator Good morning, everyone. Welcome to the Core Molding Technologies Second Quarter Fiscal 2022 Financial Results Conference Call.
- 08/13/2022
|
Core Molding Technologies, Inc. (CMT) CEO Dave Duvall on Q1 2022 Results - Earnings Call Transcript
- Core Molding Technologies, Inc. (NYSE:CMT ) Q1 2022 Results Conference Call May 10, 2022 10:00 AM ET Company Participants Sandy Martin - IR Dave Duvall - President and CEO John Zimmer - EVP and CFO Conference Call Participants JP Geygan - Global Value Investment Corp. Justyn Putnam - Talanta Investment Group Chip Moore - EF Hutton Operator Good morning, and welcome to the Core Molding Technologies First Quarter 2022 Earnings Conference Call. [Operator Instructions] Please note this event is being recorded.
- 05/14/2022
|
Core Molding Technologies Announces Timing of Fiscal 2022 First Quarter Results
- COLUMBUS, Ohio , May 3, 2022 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company"), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America and Mexico, today announces that it will release its fiscal 2022 first quarter results on Tuesday, May 10, 2022, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.
- 05/03/2022
|
Core Molding Technologies, Inc. (CMT) CEO Dave Duvall on Q4 2021 Results - Earnings Call Transcript
- Core Molding Technologies, Inc. (CMT) CEO Dave Duvall on Q4 2021 Results - Earnings Call Transcript
- 03/08/2022
|
Core Molding Technologies Reports Q2 2021 Results
- COLUMBUS, Ohio, Aug. 6, 2021 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company") today announced results for the second quarter ended June 30, 2021. The Company earned net income of $4.1 million, or $0.48 per share, for the second quarter 2021 on net sales of $80.5 million.
- 08/06/2021
|
4 Stocks With CEO Buys in the Past Month
- According to the CEO Buys Screen, a Premium All-in-One Screener template, four stocks that had at least three insider buys including the CEO during the past month are REV Group Inc. ( REVG , Financial), Vincerx Pharma Inc. ( VINC , Financial), Core Molding Technologies Inc. ( CMT , Financial) and Processa Pharmaceuticals Inc. ( PCSA , Financial).
- 07/08/2021
|
Core Molding Technologies Reports Strong Q1 2021 Results
- COLUMBUS, Ohio, May 7, 2021 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company") today announced results for the first quarter ended March 31, 2021. The Company recorded net income of $3.5 million, or $0.41 per share, for the first quarter 2021 on net sales of $72.8 million.
- 05/07/2021
|
Core Molding Technologies Accelerates The Expiration Of Stockholder Rights Plan
- COLUMBUS, Ohio, March 31, 2021 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) today announced that its board of directors voted to accelerate the expiration of the company's stockholder rights plan to March 31, 2021 to further enhance the company's corporate governance profile. The stockholder rights plan was originally scheduled to expire on April 20, 2021.
- 03/31/2021
|
Core Molding Technologies Reports Strong Full Year 2020 Results
- COLUMBUS, Ohio, March 11, 2021 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company") today announced results for the full year and fourth quarter ended December 31, 2020. The Company recorded net income of $8.2 million for the full year 2020 compared to a net loss of $15.2 million for the same period in 2019.
- 03/11/2021
|
Core Molding Technologies (NYSE:CMT) and Armstrong Flooring (NYSE:AFI) Critical Survey
- Core Molding Technologies (NYSE:CMT) and Armstrong Flooring (NYSE:AFI) are both small-cap industrial products companies, but which is the superior stock? We will compare the two companies based on the strength of their analyst recommendations, risk, dividends, institutional ownership, earnings, profitability and valuation. Institutional and Insider Ownership 53.1% of Core Molding Technologies shares are held by […]
- 10/15/2020
|
CORE MOLDING TECHNOLOGIES : ELECTS NEW BOARD MEMBER | MarketScreener
|
ACB to probe case against SMC official
- The Surat ACB officials, after getting orders from the higher authorities, started probe into disproportionate assets of the SMC officials arrested in the case.
- 10/09/2020
|
Fiberglass Market by Glass Type, Resin Type, Product Type, Application and Region - Global Forecast to 2025 - ResearchAndMarkets.com
|
Core Molding Technologies (NYSE:CMT) vs. Forward Industries (NYSE:FORD) Financial Contrast
- Core Molding Technologies (NYSE:CMT) and Forward Industries (NASDAQ:FORD) are both small-cap industrial products companies, but which is the better stock? We will compare the two companies based on the strength of their risk, analyst recommendations, dividends, institutional ownership, earnings, valuation and profitability. Profitability This table compares Core Molding Technologies and Forward Industries’ net margins, return […]
- 10/02/2020
|
Shin-Etsu Chemical Has Developed an Epoch-making Type of Molding Silicone Rubber That Does Not Require Post Cure
- In addition to its already being marketed liquid silicone rubber form, Shin-Etsu Chemical Co., Ltd. (Head Office: Tokyo, President, Yasuhiko Saitoh) h
- 09/28/2020
|
Fmr LLC Buys 4,944 Shares of Core Molding Technologies, Inc. (NYSEAMERICAN:CMT)
- Fmr LLC raised its stake in shares of Core Molding Technologies, Inc. (NYSEAMERICAN:CMT) by 0.5% during the 2nd quarter, according to its most recent filing with the SEC. The firm owned 1,057,295 shares of the industrial products company’s stock after acquiring an additional 4,944 shares during the period. Fmr LLC owned approximately 12.87% of Core […]
- 09/24/2020
|
Electric Actuators Market 2020 - 2024: Post-Pandemic Industry Planning Structure | Technavio
- The Global Electric Actuators Market will grow by USD 843.86 mn during 2020-2024
- 09/23/2020
|
American Biltrite (OTCMKTS:ABLT) vs. Core Molding Technologies (OTCMKTS:CMT) Critical Survey
- American Biltrite (OTCMKTS:ABLT) and Core Molding Technologies (NYSE:CMT) are both construction companies, but which is the superior investment? We will compare the two businesses based on the strength of their profitability, dividends, valuation, earnings, analyst recommendations, risk and institutional ownership. Earnings and Valuation This table compares American Biltrite and Core Molding Technologies’ gross revenue, earnings […]
- 09/20/2020
|
Markets lifted by hopes of economic recovery from Covid-19 slump - business live
- Rolling coverage of the latest economic and financial news
- 08/10/2020
|
China's factory deflation slows in July as recovery gains strength
- China's factory deflation slows in July as recovery gains strength
- 08/10/2020
|
North Bengal death tally nears 100 mark - The Statesman
- However, panic began when workers of the Siliguri Municipal Corporation (SMC) started barricading her hose with ribbons to demarcate a containment area today.
- 08/08/2020
|
SMC cancels MoUs with 3 pvt hospitals over lack of fire safety systems, exits
- During the day-long drive, Civic officials found that there weren’t adequate fire safety systems and emergency exits in 12 such hospitals. Notices to get the needful done within the next couple of days were sent to these hospitals.
- 08/07/2020
|
China industrial output rises 4.8% year-on-year in June; retail sales, investment fall
- China industrial output rises 4.8% year-on-year in June; retail sales, investment fall
- 07/16/2020
|
COVID-19 Takes Shine Off Diamond City; Surat Now Next Hotspot
- With over 5,000cases of coronavirus registered till now and a gradual increase in daily infections since the last two weeks, Surat city is emerging as the next COVID-19 hotspot in Gujarat after Ahmedabad.
- 07/02/2020
|
COVID-19 takes shine off diamond city; Surat now next hotspot
|
SPH is biggest winner at Asian Media Awards
- The Straits Times has been recognised for its impactful editorial content as well as its infographics and photos at the Asian Media Awards (AMA) this year.. Read more at straitstimes.com.
- 07/01/2020
|
Singapore Press Holdings wins big at Asian Media Awards
- SINGAPORE - The Straits Times was recognised for its impactful editorial content as well as its infographics and photos at the Asian Media Awards (AMA).. Read more at straitstimes.com.
- 07/01/2020
|
Surat: Two new Covid facilities at SMC community hall, SGCCI premises
- The SMC authorities along with Surat district administrative officials, visited the International Convention Cum Exhibition Centre at Sarsana on June 12 and started work to get clearances for a Covid-care facility on its premises.
- 07/01/2020
|
Dog that bit Sibu Municipal Council employees has rabies
- SIBU: The dog that had bitten two members of the Sibu Municipal Council (SMC) dog team on June 28 has tested positive for rabies.
- 06/30/2020
|
Ready with action plan for Covid monitoring: Deb
- Wards 18 and 28 cover a significant portion of slum areas.
- 06/30/2020
|
SpaceX set for rocket recovery first after US military satellite launch
- A SpaceX Falcon 9 is set to become the first commercial rocket to attempt to land after an operational launch for the US military, potentially paving the way for an even more significant milestone somewhere down the road. Featuring brand new booster B1060 and a new upper stage and payload fairing, Falcon 9 is scheduled …
- 06/30/2020
|
Five things to look out for today
- The ruling PAP is likely to be challenged in all 93 seats at the close of nomination proceedings today. . Read more at straitstimes.com.
- 06/29/2020
|
Singapore GE2020: Five things to look out for on Nomination Day
- The ruling PAP is likely to be challenged in all 93 seats by 10 opposition parties at the close of nomination proceedings on Tuesday (June 30).. Read more at straitstimes.com.
- 06/29/2020
|
Shimla residents up in arms against inflated bills in COVID-19 crisis
- Enraged over-inflated bills of electricity, water and property tax, Shimla Nagrik Sabha (SNS) on Monday staged a protest and accused the state government.
- 06/29/2020
|
Core Molding Technologies Appoints Tom Cellitti Chairman Of The Board Of Directors
- The Board of Directors of Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding" or the "Company") has appointed Tom Cellitti to the position of Vice Chairman of the Board of Directors.
- 06/29/2020
|
Over 17k workers in Surat diamond hub screened, Gujarat Covid tally 31,444
- Of the total 19 deaths reported from the state, two were from Surat district and one from Surat city. Remaining 13 were reported from Ahmedabad city, while one each from Gandhinagar, Aravalli and Bharuch, taking the toll to 1,813.
- 06/29/2020
|
Supreme Court: Ohio Pot Referendum Petitions Must Have Signatures
- The Supreme Court refused last week to bend Ohio election rules to accommodate marijuana decriminalization advocates who failed ...
- 06/28/2020
|
Singapore GE2020: PAP team in Sengkang GRC to be led by Ng Chee Meng
- Labour chief Ng Chee Meng will lead the People's Action Party team contesting in the new Sengkang GRC in the July 10 election.. Read more at straitstimes.com.
- 06/28/2020
|
More markets in Siliguri shut
- Family members said Biplab Saha had returned from Mumbai, where he used to work in a jewellery unit, on 22 June.
- 06/28/2020
|
Singapore GE2020: Progress Singapore Party introduces last 6 of 24 candidates
- The Progress Singapore Party (PSP) yesterday introduced the final six of its 24 candidates for the coming general election, laying out its complete election plans - including where each candidate would be fielded.. Read more at straitstimes.com.
- 06/26/2020
|
SMC signs MoU with hospitals: 37 pvt hospitals to provide 2,000 beds for Covid treatment in Surat
- Under the tag line of “early treatment at door steps”, the SMC has also started 105 dhanvantri raths (mobile medical van), which roam in the city and give treatment to the patients suffering from normal cold, cough and fever at their homes.
- 06/25/2020
|
Residents shocked and saddened by former Workers' Party chief Low Thia Khiang's decision to not contest GE2020
- The surprise announcement from the Workers' Party (WP) on Thursday (June 25) that former chief Low Thia Khiang would not contest the coming election was the talk of the town, especially in Hougang and Aljunied, where residents said they were saddened by the news.. Read more at straitstimes.com.
- 06/25/2020
|
SMC (OTCMKTS:RCRUY) Stock Price Down 3.6%
- SMC Corporation (OTCMKTS:RCRUY)’s share price traded down 3.6% during mid-day trading on Wednesday . The stock traded as low as $6.98 and last traded at $7.02, 86,594 shares were traded during trading. A decline of 61% from the average session volume of 221,707 shares. The stock had previously closed at $7.28. Separately, Citigroup raised shares […]
- 06/25/2020
|
Singapore GE2020: What are the hot seats to watch this election
- The newly formed Sengkang GRC is one of them.. Read more at straitstimes.com.
- 06/23/2020
|
SMC Power acquires Concast’s unit via IBC
- SMC Power, incorporated in 2000, is part of the promoter group that also owns SMC Foods and Creamy Foods Ltd, which sells dairy products in north India.Concast Steel and Power, an integrated iron and steel manufacturer with a sintering plant and sponge iron units in Jharsuguda
- 06/23/2020
|
SMC Power acquires Concast’s steel units in largest liquidation deal
- Concast Steel and Power, an integrated iron and steel manufacturer, in Jharsuguda, declared bankruptcy in November 2017 with outstanding dues of nearly ₹10,000 crore
- 06/22/2020
|
Registration of HC Surgical's Julian Ong as doctor conditional for now
- THE Singapore Medical Council's (SMC) Interim Orders Committee ordered that the registration of Julian Ong as a medical practitioner be made conditional for a period of 18 months from June 18, or until the conclusion of an inquiry or proceedings against him under Part VII of the Medical Registration Act, whichever is sooner. Read more at The Business Times.
- 06/19/2020
|
Core Molding Technologies, Inc. (NYSEAMERICAN:CMT) Sees Large Decline in Short Interest
- Core Molding Technologies, Inc. (NYSEAMERICAN:CMT) saw a large drop in short interest during the month of June. As of June 15th, there was short interest totalling 57,700 shares, a drop of 15.6% from the May 31st total of 68,400 shares. Based on an average daily volume of 78,400 shares, the short-interest ratio is presently 0.7 […]
- 06/19/2020
|
Asok tests positive for Covid-19 - The Statesman
- Officials scramble to trace primary contacts; they urge all who had met the former mayor to remain in home isolation.
- 06/18/2020
|
Philippine business tycoon Eduardo ‘Danding’ Cojuangco dies at 85
- MANILA (Philippine Daily Inquirer/ANN): Business tycoon Eduardo 'Danding' Cojuangco has died. He was 85.
- 06/17/2020
|
Coronavirus hits Siliguri anti-dengue plans - The Statesman
- Frontline workers of the civic body are engaged in tackling Covid-19, especially as the cases are on the rise in the town, owing to which the SMC has not been able to implement a yearly comprehensive anti-dengue plan.
- 06/17/2020
|
CORE MOLDING TECHNOLOGIES INC : Submission of Matters to a Vote of Security Holders (form 8-K) | MarketScreener
|
School apologises as it scraps controversial mixed-age classes
- St Petroc's in Bodmin was heavily criticised when it imposed the change two years ago and has now acknowledged the strength of feeling that 'parents had over the whole episode' and promised that 'nothing comparable ever happens again'
- 06/15/2020
|
Coronavirus in India: Surat's 8 diamond firms partly shut after positive cases
- The Surat Municipal Corporation (SMC) said that it has ordered closure of certain floors and departments of these eight diamond units located in the city's Katargam locality, to contain the spread of coronavirus
- 06/14/2020
|
COVID-19: Surat's 8 diamond firms partly shut after positive cases
- The Surat Municipal Corporation (SMC) said that it has ordered closure of certain floors and departments of these eight diamond units located in the city's Katargam locality, to contain the spread of coronavirus.
- 06/13/2020
|
8 diamond firms in Surat partly shut after 23 workers test COVID-19 positive
- With the detection of several positive cases, certain departments of diamond units, including Shivam Jewellers, SRK Empire, Dharmnandan Diamonds, Rinkle Impex, C Dinesh and Co, JB and Brothers, and Royal Diamonds, have been shut, the civic body said in a statement.
- 06/13/2020
|
Surat: After 23 workers test positive, ‘floors’ of 8 diamond units shut
- SMC Deputy Health Commissioner, Dr Ashish Naik said,”We have quarantined family members of all 23 diamond polishers who tested positive. Their samples were collected and the results are awaited. Their homes have also been disinfected by our teams,”
- 06/13/2020
|
Surat Smart City takes key IT initiatives in COVID -19 management and containment - Accommodation Times
- By AT Bureau Surat Municipal Corporation has taken various IT initiatives to fight COVID-19. SMC has developed SMC COVID-19 Tracker System which includes a web portal and Mobile application named “SMC COVID-19 Tracker” to track people who have abroad or interstate travel history and persons who have come in direct contact with positive COVID-19 individuals....
- 06/04/2020
|
Asia's factory pain worsens as China's recovery fails to lift demand
- Asia's factory pain worsens as China's recovery fails to lift demand
- 06/01/2020
|
SMC COVID-19 Tracker app developed to track citizens with travel history
- SMC has also started a helpline number 1-800-123-800 where a citizen can share details about travellers or suspects.
- 05/29/2020
|
SGX Nifty trades 45 points higher; here's what changed for market while you were sleeping
- Nifty futures on the Singapore Exchange traded 47.90 points, or 0.51 per cent higher at 9,359 in signs that Dalal Street was headed for a positive start on Thursday.
- 05/28/2020
|
The plight of India’s largest car maker causes Japanese giant Suzuki’s first revenue decline in three years
|
Nigeria’s siamese twins of justice - Vanguard News
- NO two other judges in Nigeria have stood and fought jointly for justice, including taking military dictatorship head-on, like Justices...
- 05/25/2020
|
Will accept post of chairman of BOA of SMC only if no TMC members in board: Bhattacharya
- The West Bengal government has
appointed the Mayor of Siliguri Municipal Corporation (SMC) Asok Bhattacharya as chairman of the board of administrators of the civic body as its term is slated to end on May 17.
However, Bhattacharya on Saturday
- 05/16/2020
|
Core Molding Technologies Reports $11.8M Improvement In Net Income On 11.4% Lower Sales For The First Quarter 2020
- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company") today announced results for the first quarter ended March 31, 2020.
- 05/11/2020
|
Woman who won defamation suit brought by Dr Julian Ong plans as shareholder to sue HC Surgical CEO
- SINGAPORE (THE BUSINESS TIMES) - HC Surgical Specialists (HCSS) said on Sunday night that minority shareholder Serene Tiong, whom the group's surgeon Julian Ong had unsuccessfully sued for defamation, plans to sue its chief executive officer Heah Sieu Min in the listed company's name and on its behalf.. Read more at straitstimes.com.
- 05/11/2020
|
Grenada: Official COVID-19 Tourism Update
- Grenadians and visitors will have to wait until 2021 to experience the one of a kind Spicemas Carnival celebrations as the Spicemas Corporation (SMC) took | eTurboNews | Trends | Travel News | Travel Destination
- 05/05/2020
|
Sen Yue engages external auditor to review financial results, suspends trading
- THE board of Catalist-listed Sen Yue Holdings has roped in its external auditors Deloitte & Touche to assist in reviewing specific areas of its financial results for the half year ended March 31, in light of the "challenging economic environment" amid the novel coronavirus pandemic. Read more at The Business Times.
- 05/04/2020
|
Core Molding Technologies, Inc. Adopts Limited Duration Stockholder Rights Plan
- Core Molding Technologies, Inc. (NYSE American: CMT) (the "Company"), today announced that its Board of Directors (the "Board") has adopted a limited duration stockholder rights plan.
- 04/21/2020
|
44 Stocks Moving In Tuesday's Mid-Day Session
- Gainers
The Peck Company Holdings, Inc. (NASDAQ: PECK) shares climbed 68.5% to $4.50.
Core Molding Technologies, Inc. (NYSE: CMT) gained 35.1% to $3.2429.
TriState Capital...
- 04/21/2020
|
Did Changing Sentiment Drive Core Molding Technologies's (NYSEMKT:CMT) Share Price Down A Painful 94%?
- Long term investing works well, but it doesn't always work for each individual stock. It hits us in the gut when we...
- 04/09/2020
|
Core Molding Technologies Reports Results For The 2019 Fourth Quarter And Full Year
- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company") today announced results for the fourth quarter and full year ended December 31, 2019.
- 03/13/2020
|
Four ways 5G is transforming the medical field
- From farming to gaming to driving to work, 5G is promising to be a ubiquitous force There doesn’t seem to be a single vertical that isn’t being transformed by the next generation of cel…
- 02/04/2020
|
Aniversário de SP terá mais de 300 atividades espalhadas por toda a cidade
- Os 466 anos da capital paulista serão comemorados com shows, cinema, dança, teatro e circo, em cerca de 150 pontos nas ruas e equipamentos culturais.
- 01/24/2020
|
Lens on motor covers may aid buyers
- Insurance company officials say that fining brokers for dealing with select companies could now open up the business for two dozen companies. Customers could benefit if upstart companies start quoting low rates to get a toehold in the motor business.
- 01/11/2020
|
Is Core Molding Technologies, Inc. (CMT) A Good Stock To Buy?
- We are still in an overall bull market and many stocks that smart money investors were piling into surged through the end of November. Among them, Facebook and Microsoft ranked among the top 3 picks and these stocks gained 54% and 51% respectively. Hedge funds' top 3 stock picks returned 41.7% this year and beat […]
- 12/24/2019
|
Core Molding Technologies Reports Third Quarter 2019 Results
- COLUMBUS, Ohio , Nov. 18, 2019 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company") today announced results for the ...
- 11/18/2019
|
Is Core Molding Technologies (NYSEMKT:CMT) A Risky Investment?
- Some say volatility, rather than debt, is the best way to think about risk as an investor, but Warren Buffett famously...
- 11/04/2019
|
Have Insiders Been Buying Core Molding Technologies, Inc. (NYSEMKT:CMT) Shares?
- It is not uncommon to see companies perform well in the years after insiders buy shares. Unfortunately, there are also...
- 09/20/2019
|
Core Molding Technologies Reports Second Quarter 2019 Results
- COLUMBUS, Ohio , Aug. 8, 2019 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company") today announced results for the ...
- 08/08/2019
|
If You Had Bought Core Molding Technologies (NYSEMKT:CMT) Stock Three Years Ago, You'd Be Sitting On A 64% Loss, Today
- If you are building a properly diversified stock portfolio, the chances are some of your picks will perform badly. But...
- 08/06/2019
|
The shadow of Brexit on speed of access -
- What does Brexit mean for the speed of access to new medicines? One way of looking at this is to explore trends in submissions to the HTAs
- 03/20/2019
|
Gaia Spacecraft Reveals Ancient Collision of Two Milky Way Satellites | The Daily Galaxy
- These clouds of stars called the Small Magellanic Cloud and the Large Magellanic Cloud, or SMC and LMC are satellite galaxies of the Milky Way. Using the newly released data from a new, powerful space telescope, University of Michigan astronomers have discovered that the southeast region, or “Wing,” of the Small Magellanic Cloud is […]
- 10/26/2018
|
Witness the Spectacular and Mysterious Cosmos Through Hubble's Eye
- Witness the most spectacular and mysterious depths of the cosmos through Hubble's eye. These unique images are some of the best ever capture by the Hubble Space Telescope.
- 04/07/2018
|
Surat in the Lead of Smart City Projects - Accommodation Times
- By Accommodation Times Bureau Surat Municipal Corporation’s (SMC) smart city cell n its presentation at the national workshop on urban transformation held in New Delhi on June 23 said that out of 39 projects undertaken by it under the project, 26 would either be completed or reach project implementation stage by this weekend. Detailed project reports...
- 06/29/2017
|
SMC Capital’s Hamilton Tang Bets On Rider Horse IPO
- SMC Capital's Hamilton Tang Bets On Rider Horse IPO – China Money Network - China Money Network
- 02/08/2017
|
