FARO Technologies, Inc. (FARO) on Q1 2021 Results - Earnings Call Transcript
Operator: Good morning, everyone, and welcome to the FARO Technologies First Quarter 2021 Earnings Call. For opening remarks and introductions, I will now turn the call over to Michael Funari at Sapphire Investor Relations. Please go ahead. Michael Funari: Thank you and good morning. With me today from Faro are Michael Burger, Chief Executive Officer, and Allen Muhich, Chief Financial Officer. Yesterday, after market close, the company released its financial results for the first quarter of 2021. The related press release and Form 10-Q for the first quarter are available on Faro's website at www.faro.com. To help you better understand the company and its results, during the course of this call, management may make statements that may be considered forward-looking and are made pursuant to the Safe Harbor provisions of the Private Securities Litigation Reform Act of 1995. Michael Burger: Thank you Mike. Good morning and welcome to our call. First quarter demand for our products reflected a combination of expected seasonality as well as ongoing improvement as our markets continued to recover from the adverse effects of our pandemic. On a geographic basis each of our served regions exhibited similar levels of seasonal softness. Within our end markets, we saw broad-based seasonality in line with historical trends. Service revenue, which typically does not have a seasonal component grew incrementally off of fourth quarter levels. While near-term demand remains below 2019 run rate levels, we continue to believe order activity will improve throughout 2021 as our customers activities normalize. When combined with our new cost structure, we continue to have line of sight to achieving our stated success model once revenue levels return to 2019 levels. That said, we remain cautious as market uncertainties such as global health conditions and semiconductor supply chain shortages may adversely affect near-term demand for our products. Allen Muhich: Thank you, Michael and good morning, everyone. First quarter revenue of $76.3 million was down 4% when compared to the first quarter of 2020 as a result of continued market softness caused by the pandemic. Product revenue of $54.6 million was down 3% and service revenue of $21.7 million was down 6%. Bookings of $80.6 million grew 3% year-over-year. Both GAAP and non-GAAP gross margin approximated 53% for the first quarter of 2021. Gross margin remained lower than last year primarily due to lower fixed cost absorption on lower overall demand as well as the ongoing higher demand for the lower priced product configurations. We remain confident in our ability to achieve our 55% to 60% gross margins when revenue returns to pre-pandemic levels. Operator: We will take our first question from Jim Ricchiuti from Needham. Your line is open. Please go ahead. Jim Ricchiuti: Thank you. Good morning. Yes, I know Q1 is not a good indicator just given the seasonality of the business. But I wanted to maybe focus a little bit on what you're seeing in the business geographically because just looking at it on a year-over-year basis the US was maybe off a little bit more than we would have thought as was APAC just given some of the signs of recovery there we're seeing. Michael Burger: All right. Yes. We continue to -- again, I think Asia was the first to really show some signs of improvement and we've seen that as you know -- in Q3, Q4, we've seen Asia coming back pretty nicely. And I think from a seasonality perspective, certainly Chinese New Year is a big effect in Q1. North America continues to struggle I think we're seeing the northeast opening up a little bit more which is encouraging. The West Coast has been relatively strong. The West Coast and southwest for us, but the northeast has continued to struggle. And we're seeing signs of recovery now which is really good. I think the automotive space we're also seeing signs of life in the Detroit area which is helpful. So, we're encouraged by what we're seeing in terms of funnel build and quoting activity, but Q1 we expect it to be down. Europe continues to impress us and -- with this recovery and even though we're seeing lockdowns in places like Italy and The Netherlands, we were pretty encouraged by what we're seeing in Europe. Jim Ricchiuti: Got it. Hey Michael, I'm intrigued a little bit by that use case and this identifying these 26 different workflows. And I'm wondering can you talk a little bit about maybe what the top three or four of these workflows might be or is it still pretty relevant? Michael Burger: Sure. Well, we are going to end up talking about these very much like we talk about products. So, for construction in this space floor flatness is one. In public safety; forensics where we've been strong in the past. But now we're putting together a complete workflow around for example ballistics or blood spatter are examples of workflows that we're going to build on in 3D metrology digital twin will be a big part of our -- or will be one of our leading workflows in the 3D metrology/AEC space. Jim Ricchiuti: Got it. And last question just if there is any color you could provide in terms of what you might be seeing in the kind of book and ship short-cycle business for the current quarter? Michael Burger: Yes, it's encouraging. I think honestly Jim the reality is Q1 and the seasonality actually returning to a seasonal kind of cadence is encouraging for us. Frankly none of us really knew what kind of cycle to expect. We were planning and forecasting around a seasonality March where Q1 typically is our softest quarter and then we begin to Q2 is better, Q3 we kind of go sideways based on the European vacations. And then Q4 if that holds then I think our -- I wouldn’t say forecast but our prediction is that we'll end up in Q4 of 2021 right back to similar levels in 2019. That's what we said a year ago and we're holding to it and it looks like it's coming true which is great. Jim Ricchiuti: Thanks a lot. Michael Burger: Thanks Jim. Appreciate your interest. Operator: Our next question comes from Greg Palm from Craig-Hallum. Your line is open. Please go ahead. Danny Eggerichs: Hi guys. This is Danny Eggerichs on for Greg. Michael Burger: Hey Danny. Danny Eggerichs: Just looking from an end market standpoint just wondering if there was if we could get a little more color there, if there is any outperformance or underperformance relative to your expectations in the quarter? Michael Burger: Sure. We've seen the AEC market the construction business continue to kind of build some strength even though seasonality we saw a bit of softness across the board. But we expect that and as it relates to looking at past years AEC seems to be pretty strong. Public safety is a small market for us, but we're showing signs of penetration both in Europe and Asia which is new for us and exciting. 3D metrology is really kind of the last holdout, if you will from a recovery perspective. And that's we saw some nice recovery in Europe in 3D metrology. But as Jim Ricchiuti, was asking we've seen the northeast and kind of north central portions of the United States still continue to be soft. And that's a big part of our 3D metrology market in North America. Danny Eggerichs: Got it. That's helpful. And then I appreciate all the color on maybe new product intros as we go throughout the year. Michael Burger: Yeah. Danny Eggerichs: Where – any update on maybe a timeline for that kind of aggregated software offering launch? Michael Burger: We are still planning on the second half and we're working our butts off for it. It's a big thing for us, as it relates to the total cadence in 2020. We introduced about 10 new products. And I think last quarter, we mentioned, it will we'll do better this year and we're on track for that. Danny Eggerichs: And then as it relates to that and OpEx, how should we look at OpEx with these new product launches coming maybe remain a little elevated as we move throughout the year? Allen Muhich: I think – this is Allen. From an operating expense standpoint, again, our success model has us being around that $40 million to $43 million level. We were at the higher end of the range obviously in Q1 I think we would expect to remain approximately in that range as we continue throughout the balance of the year. Danny Eggerichs: Okay. Great. That's it for me. Thanks for taking my questions. Michael Burger: Thanks, Dan. Appreciate it. Operator: We'll take our next question from Andrew DeGasperi from Berenberg Capital. Your line is open. Please go ahead. Alex Ross: Hi. This is Alex Ross on behalf of Andrew DeGasperi. Thank you for taking our questions. I had one on the exposure to the auto industry. We have heard that auto manufacturers are cutting production from the semi shortage. So I was just wondering, if you've heard anything from your customers about that? And how you think that will impact rest of the year? Thank you. Michael Burger: Yeah. We're fortunate in a sense that the automotive capacity is not a direct tie to capital purchases for our products as we are primarily offline. So we're not tied directly to kind of ebb and flow of capacities, which I think bodes well for us. I think that said, however, with depressed revenue levels spending on capital may take longer cycles. And we believe that, that's part of the reason that we've seen kind of the northwest or the northeast and the – and north central kind of slow, because the automotive world has not really fully recovered yet. I think semiconductor shortage is part of it, yes. Alex Ross: Okay. That's helpful. And if I could just ask one more on the competitive landscape. Have you seen any change in competition compared to the last quarter? Michael Burger: No, nothing dramatic. I think pricing – we're fortunate that, we've got some pretty good competitors in the context of, how they price their products where we haven't seen anything unusual or anything that or any new competitor of merit. Alex Ross: Great. That's it from me. Thank you. Michael Burger: Thank you. Thank you for your questions. Operator: Our next question comes from Richard Eastman from Baird. Your line is open. Please go ahead. Richard Eastman: Yes. Thank you, and good morning. Michael Burger: Good morning. Allen Muhich: Good morning, Richard. Richard Eastman: Very quick question. Michael, you alluded a bit to the supply chain issues that we're seeing everywhere, I guess, at this point. Is it your perspective that maybe that's more of a top line impact for FARO, just when you think about your customer base and their inability to produce and spend for that matter or is are you seeing some impact around your gross margins on the product line side for that? Michael Burger: No. The semiconductor situation hasn't really impacted us directly in the context of building our own products. So, I think we're fortunate at least to this stage. So, I think it's more of a second order affect, and affecting our customers ability or confidence to actually build capacity, which ultimately I think the depresses earnings, and when earnings are depressed, then you basically have an effect on capital buys. And typically, what we've seen in this situation is not so much that we – the opportunities go away, they just get pushed out, because capital signature authorities typically a elongated. So, I think the effect maybe pushing out of revenue for us, relatively short-term. Richard Eastman: Okay. And that's going to be more on the 3D measurement side as well, presumably? Michael Burger: Yeah. Actually, yes, across the Board probably. Automotive and 3D metrology in general, I think will probably be affected the most. Richard Eastman: Okay. And then maybe just a quick question around, I noticed in the queue, there was some inventory obsolescence charges taken. What does that do to the product gross margin in the quarter? Maybe this – Allen, question on the basis – Michael Burger: Let me talk about how that occurred and then I'll let Allen talk about the financial implications. As you know, we have been pretty critical and I think very aggressive in terms of looking at our product portfolio. In this situation, there was a product that was being developed, but we did not believe was going to be competitive or cost effective. So we ended up basically canceling that product and redirecting R&D elsewhere. And then resulting in the -- the resulting of that move was basically some excess inventory. Go ahead Allen. Allen Muhich: Yeah. And the impact on the quarter financially from a margin standpoint on the overall revenue profile was just a bit north of one percentage point. Richard Eastman: Okay. To gross margins? And then… Allen Muhich: True. Richard Eastman: Yeah. And then just this product mix dynamic -- we've spoken to this before. And I understand, again, this kind of mix issue or shift maybe toward the lower price point product, again presumably in 3D measurement. Is that kind of stabilizing here in terms of product mix impact? Michael Burger: Yes, it has. I think on a quarter-to-quarter basis, we have seen it stabilize which we think is positive. And I think -- go ahead. Allen Muhich: Maybe just to add a little bit there, I think our product marketing team initiated a couple of actions in the quarter, and frankly they had a little bit of a positive impact. So I think we saw not only stabilization, but a bit of improvement in that mix, but it's still relative to historic levels a bit worse than we were at previously a year or two ago. Richard Eastman: Okay. Okay. Excellent. All right. Well, thank you. Allen Muhich: Thank you. Operator: Our next question comes from Ben Rose from Battle Road. Your line is open. Please go ahead. Ben Rose: Yes. Hi, good morning, Michael and Allen. Just a question you had mentioned the digital twin use case… Michael Burger: Right. Ben Rose: …on the 3D metrology side. And I know that you have had some I believe interesting evaluations going on in perhaps in some of the European automotive companies for the use of digital twin technology. Could you speak to those evaluations and perhaps where you think they might stand? Michael Burger: We don't really have an announcement today as it relates to where we are with customers. But I will say that I'm super excited about where we are with digital twin and the evaluations that are ongoing have increased in terms of the number of evaluations. And the feedback continues to be extremely positive leveraging the acquisition that we've made ATS out of Sweden. So we're really I think we're actually making great progress. Ben Rose: Great. Great. And then on the Public Safety side I know you mentioned last quarter and it sounds like even this quarter some pretty good opportunities in Public Safety. Could you speak to that part of the business in North America and perhaps how that's performing including seasonal impacts? Michael Burger: Yeah. No in general, North America continues to be our largest market for Public Safety and we're continuing to make I think positive inroads. The sales cycle for Public Safety is quite a bit longer than our other products even including construction. So when -- we're selling to municipalities and in townships, if you will. And so in many cases that sales cycle takes time. In Europe and Asia, in many cases, we're selling at a country level which actually as you can imagine it takes even longer. So it's a marathon not a sprint. And we did expect to see some seasonality as many municipalities are on a fiscal year. And so many of them have -- are in the process of getting new budgets for the year, which impact their ability to buy equipment and so that the process has started all over again. There is some uncertainty about obviously funding, particularly police departments and so there is some concern about let's make sure that our capital budgets are intact before we move. That said, our funnel for Public Safety continues to grow and it's quite healthy both in North America and external. Ben Rose: Okay. Great. Thanks very much. Michael Burger: You're welcome. Thank you. Operator: It appears that we have no further questions at this time. I will now turn the program back over to our speakers for any additional or closing remarks. Michael Burger: We really appreciate everybody's attention today. I know you're all busy and we look forward to giving you an update next quarter. Thank you very much. Operator: This does conclude today's program. Thank you for your participation. You may disconnect at this time.FARO Ratings Summary
FARO Quant Ranking
Related Analysis
FARO Technologies Reported Q3 Results, Slightly Below Expectations
FARO Technologies, Inc. (NASDAQ:FARO) reported its Q3 results, which were slightly below Street estimates. Total sales were $79.2 million. The company’s management explained that the lower-than-expected sales growth of 12% in Q3 was tied to a $5 million slippage of deals into the next quarter, entirely tied to Asia.
Analysts at Berenberg Bank provided their view on the company following the report, mentioning that Q3 activity was somewhat soft sequentially, however, funnel activity remains strong for Q4.
FARO Sphere is currently in beta testing and is expected to launch in Q4. The analysts, which lowered their price target on the company’s shares to $93 from $98, believe FARO Sphere, alongside Holobuilder will be the key lever to improving the recurring revenue mix.
