Cepton, Inc. (CPTN) on Q1 2022 Results - Earnings Call Transcript
Operator: Good afternoon, everyone, and welcome to Cepton's First Quarter 2022 Earnings Conference Call. Today's call is being recorded, and we have allocated one hour for prepared remarks and Q&A. At this time, I'd like to turn the conference call over to Hull Xu, Chief Financial Officer. You may begin. Hull Xu: Thank you, and welcome, everyone, to Cepton's First Quarter 2022 Earnings Call and Business Update. With me today is Jun Pei, Co-Founder and Chief Executive Officer. During the call, we may refer to our unaudited GAAP financials and non-GAAP measures in our earnings release. The non-GAAP financial measures should not be considered as a substitute or superior to the measures of financial performance prepared in accordance with GAAP. Reconciliation for non-GAAP measures are included in our earnings release. I would like to remind everyone that comments made in this conference call may include forward-looking statements regarding the company's expected operational and financial performance for future periods. These statements are based on the company's current expectations and are subject to the safe harbor statements relating to forward-looking statements contained in our earnings release and the slides that accompany this call. Actual results for future periods may differ materially from those expressed or implied by these forward-looking statements due to a number of risks, uncertainties or other factors, including those discussed in the earnings release or during today's call and those described in our filings with the US SEC. We are not undertaking any commitment to update those statements as a result of future events, except as required by law. As a quick reminder, this call is being recorded, and you can find the earnings release and slides that accompany this call as well as the webcast replay of this call at investors.cepton.com. Now I would like to turn the call over to Jun. Jun Pei: Thank you, Hull, and good afternoon, everyone. Thank you for joining Cepton's First Quarter Earnings Call. We will provide a business update and review first quarter 2022 financial results with you. As you may know, from our April 5 announcement, today is Hull Xu’s first earnings call as our Chief Financial Officer. I look forward to working with Hull in his expanded role as CFO, to continue executing our 2022 milestones in this momentous year for Cepton. Our lidar’s are designed with the philosophy that it must achieve a balance between performance, cost and reliability. Our MMT lidar is the direct result of our design philosophy that enabled Cepton to win the largest ADAS series production award to date. This not only validates the viability of Cepton’s lidar for commercial ADAS, but also demonstrate lidar-enabled safe autonomy is more than a luxury feature. It is an integral part of automotive safety that should be available for everyone. I will start off with an update on our OEM series production execution. I'm happy to report, we have started shipping D-samples in support of General Motors, Ultra Cruise program. The D-sample units have been shipped to multiple manufacturing sites across the US. As a reminder, D-samples represents the final stage in hardware validation with production intact. In what has been a long process, starting with our initial engagement in 2017, Cepton is nearing the final phases of execution, making lidar’s available in consumer vehicles. We expect salable vehicles to be equipped with Cepton lidar towards the end of this year. By then, will be within just a few months from start of production where Cepton is the sole supplier for the next four years and beyond. We continue to work closely with our Tier 1 partner, KOITO Manufacturing and have started transferring manufacturing processes, equipment and software in preparation for scale production. With Lidar being a critical component of safety for commercial ADAS, it is important to have a Tier 1 supplier as our partner to support scale production. Most global OEMs require Tier 1 supplier who will stand behind the product. We anticipate this partnership will not only drive future series production wins, but also help scale production to meet the growing demand of our products. Speaking more broadly on automotive, I continue to believe that commercial validation will be the ultimate differentiation. Our series production award not only give us a significant momentum and attention from other OEMs, but also place the increased attention on the importance of Lidar in automotive safety. We continue to make progress on engagement with other top 10 OEMs and top trucking companies. We believe that in order for LIDAR to be implemented in everyday consumer vehicles the price point must start below $1,000 and work its way down to mid-three digit per unit in order to accelerate large-scale adoption. Our unique MMT technology achieved a balance of performance, cost and reliability. This balance enables Cepton to deliver a high-quality Lidar that can be placed into everyday consumer vehicles without compromising safety. In addition to our long-range forward phasing Lidar, which won the largest ADAS Series production award, we are also working on the near-range Lidar product, Nova, with which we continue to make progress with top automotive and trucking OEMs. We are starting to ship Nova B samples to OEMs for evaluation this quarter. One of our key strengths in our Lidar product is vehicle integration, such as the ability for the Lidar to be placed behind the windshield. This offers distinct advantages in vehicle design flexibility and product reliability for the OEM and the esthetic benefit for the consumer. Vehicle integration flexibility stems from the small form factor and low power consumption of our Lidar that is the benefit of our MMT innovation. We're one of the very few companies in the industry with this capability and the only company with a major series production award. We have received many calls from other interested automotive OEMs on this feature alone. We have seen accelerated enthusiasm from consumers on vehicles that have been awarded to us across multiple platforms and consumer automotive demand is off to a strong start in 2022. Our Lidar product was created with consumer ADAS in mind and we will be one of the first Lidar companies to capture this rising demand. In the coming decades, we expect ADAS to be the application that represent over 80% of the Lidar addressable market and will provide the largest return on investment. We have applied many of the learnings from the automotive market, particularly stringent requirement for performance and cost to our smart infrastructure customers. There is a growing demand for both our Lidar sensors and our Lidar perception software, where we are beginning to see our engagement mature beyond the proof-of-concept phase and leading to meaningful purchase order volumes. Moving up the software set has helped us reach many customers, who demand a complete perception solution. On the horizon, we have completed design milestones of our second ASIC which will drive further performance enhancement and cost reduction. We look forward to sharing more news with you in the coming quarters. In the near-term, our focus remains on OEM series production execution and we are looking forward to building our momentum for the rest of the year. I will now turn the call over to our CFO, Hull Xu. Hull Xu: Thank you, Jun. In February, we closed our business combination with Growth Capital Acquisition Corp. and renamed the surviving entity, Cepton Inc. Concurrent with the transaction we closed the PIPE investment anchored by Koito in the total amount of $59.5 million. We received approximately $48 million net of fees. Moving on to our first quarter results. Total revenue for the quarter was $1.5 million, up 239% year-over-year, and 16% sequentially and consists of 100% product revenue. GAAP net income was $41.2 million or $0.36 per share and $0.32 per diluted share. Non-GAAP net loss was $12.2 million or $0.11 per share, both basic and diluted. Weighted average basic shares outstanding for the first quarter was $115.9 million, and on a diluted basis, it's 127.1 million shares. Non-GAAP adjustments include a $56.7 million gain on re-measurement of earn-out share liability, $2.7 million non-recurring transaction costs related to our SPAC transaction, stock-based compensation of $1.3 million, and a $0.8 million gain on re-measurement of our warrant liabilities. Non-GAAP adjusted EBITDA was negative $11.4 million. As of March 31, 2022, we had available liquidity of approximately $160 million. Total available liquidity consists of approximately $45 million in cash and short-term investments, $15 million remaining on the Trinity loan facility and a commitment to purchase up to $100 million in equity from Lincoln Park Capital. As we said in our FY 2021 earnings call, we expect 2022 revenue to be back half weighted as our development programs achieved the remaining milestones. Starting off with automotive, we remain on track to complete the de sample phase by the end of the year and have salable vehicles equipped with such on LiDAR. We expect to ship several thousand units this year, equipping multiple vehicle models manufactured in multiple assembly plants across the United States in preparation for scale production. On smart infrastructure, we are seeing robust demand for our Vista P and SORP LIDAR as well as our Helios software product from our customers around the world and this will drive meaningful volume as projects mature throughout the year. We remain extremely focused on execution of the industry's largest ADAS series production award to date and on winning additional awards. We are confident in our long-term growth plan and our path to be a market share leader. Now I'd like to open the call for questions. Operator: Ladies and gentlemen, we will now begin the question-and-answer session. Our first question today comes from Matthew Galinko from Maxim Group. Please go ahead with your question. Matthew Galinko: Hey, good afternoon. Thanks for taking my questions. Can you give us an update on what you're seeing in the supply chain? And if that -- if you're -- from your point of view, if there's any elevated risk and how you're managing that? Jun Pei: Thank you very much for the question. Jun Pei here, CEO of Cepton. For the Q&A session, I also have our Senior Vice President of Business Development, Mitch Hourtienne joining us in answering the questions. But specifically coming to the supply chain, there are certainly very much awareness of the issues with the supply chain. Very fortunately for us, we are actually into the A, B, C, right now, D sample stage with limited volume requirement. We are being alerted for all the supply chain issues, but we're not hitting a huge obstacle with the current quantity needed to supply samples for the General Motors Ultra Cruise program. Frankly, it's not actually affecting our execution at all at this point. But we're very much vigilant, making a lot of preparation for this coming year, 2023, where the SOP will actually start. Mitch Hourtienne: Yes. Thanks, Jun. This is Mitch Hourtienne. I'll just add. When you're working with KOITO and General Motors, they have tremendous risk mitigation processes that help us with this issue. And they've been working with us as needed to address any concerns there. On the smart infrastructure side, that's a little bit more lower volume. Yes, it's become a little bit harder and more expensive to get some key components, but we've been able to procure those and, for the most part, pass on that cost increase to our customers. Matthew Galinko: Got it. Okay. That's helpful. And then, I guess, as a follow-up, I'm not sure if I missed it in your prepared remarks, I apologize, but -- if you mentioned this. But are you standing by the guidance you previously provided, or did you provide an update to that? Jun Pei: Yes. We are actually standing by our current guidance. Specifically, we have the execution of the GM program, the Ultra Cruise program, all on schedule. We started -- this is a very early process from 2017 until we get a design win in 2019. At the time, we were awarded the design win. The schedule was a SOP of 2023, after almost three years of hard work until now, the SOP time is still 2023. So, yes, we stick to our guidance. Hull Xu: Yes. Hi, Matt, this is Hull. I just want to add a little bit more color. So for 2022, as we mentioned, the revenue is going to be back half weighted. And right now, we're not seeing any constraints on the demand side -- and you mentioned the -- you asked about the supply constraints. If it becomes worse towards the end of the year that we may have some issues meeting those units, but we're not seeing that right now. So we're standing by our full year guidance. Matthew Galinko: Thank you. And one last question, and then I'll jump back in the queue. I guess, it's been -- well, I do you approach production with GOOD MORNING, and I guess it's been a couple of quarters now that you've been public with who you're working with. Just I guess, give us an update on how other OEMs are responding to that development? And as you move closer to production with GM, are you seeing some of the fast follower type OEMs move through the pipeline or move more quickly through the pipeline, or how has that changed over the last couple of quarters? Thank you. Jun Pei: Yeah, that's a great question. Certainly, with the GM announcement up to today for the past couple of quarters, we're getting a lot more attention from other OEMs. I'll let Mitch actually elaborate a little bit more on that. Mitch Hourtienne: Yeah. Matthew, this is Mitch. We're still currently engaged with all 10 of the top 10 global auto OEMs. More than half of those were in at least the RFI phase. The RFI phase can vary from a few months to in excess of a year, depending on the OEM. So we have gained a lot more interest from additional top 10 OEMs because of as more details about the GM Ultra Cruise program come out. I would say the interest is more about vehicle integration, performance in cost and solidifying those three and keeping an eye on our development milestones. So, yes, to summarize, it is definitely accelerating. Matthew Galinko: Thank you. Operator: Our next question comes from Sam Peterman from Craig-Hallum Capital Group. Please go ahead with your question. Sam Peterman: Hi, guys. Thanks for taking my question. I want to ask on Nova. It's pretty interesting that you're starting to ship that B-sample. I was just curious how broad is the interest you're seeing for Novo relative to what you've seen and what you are seeing for your long-range lidar products? Jun Pei: Well, again, thanks for asking that question. In general, the entire automotive industry with the GM design win and with the latest progress from many other fronts, there is gravity towards lidar is going to be used for the automotive safety in the future. This will include both the long-range lidar’s and short range lidar’s. Nova is the near-range lidar we have developed. It's really getting a lot of traction. So Mitch can fill in on the enthusiasm for this product. Mitch Hourtienne: Yeah, definitely. As Jun indicated, the automotive space, especially the OEMs that have already announced adoption of lidar are already beginning to look at additional applications for lidar, which includes near range, short range, medium range applications. I think if you look at our Nova product, what's interesting for potential customers, is it's reusing the MMT technology, which we're validating for General Motors. So we're simply scaling that technology down. So the maturity, the cost projections, the reliability is all proven relative to other solutions on the market. So that's the interest. In terms of applications and use cases, I would say it's an order of magnitude higher than long-range lidar and expands even well-beyond automotive. So there's just a tremendous amount of interest in our nova product. Sam Peterman: Thanks for that detail. Second question, you talked on the last call about some pretty good engagement in China with OEMs there. I was curious if recent events have changed OEMs outlooks or plans or timing for deployment at all? And if you could talk to that that would be great. Hull Xu: Hey Sam, this is Hull. So, our China progress is continuing. So, part of our plan is to bring up the China team in terms of technology and application expertise. We're also trying to find a Tier 1 that we have the confidence to work with and address the China opportunity together. The China market is, as you know, overall is at 40% of the global automotive market. So, it is a large one that we are focused on. In China, the speed of technology innovation is actually quite fast. If you follow the development of their EVs, they're actually putting LiDARs in somewhat near-term, right, when we think about near-term, it's two years out. So, look -- pay attention to future announcements from us, we do expect to have some program wins this year. Sam Peterman: Okay, that's great. And then last one, kind of, a simple question, but not knowing anything about how this works, so figure that I'd ask it. On the process transfer and the equipment transfer to Koito that's ongoing. When do you expect that to complete? And is there -- is that a pretty simple process, or are there any risks to that transfer going smoothly in production ramping? Any detail around that would be great. Jun Pei: Yes. That process is not a simple process. It started well over a year ago, whether it's actually the technology transfer or actually the tooling -- the software control part of every component. So, all of the things are being transferred throughout the last year. Now, it's actually at this final stage. In fact, I, myself, have seen the production line in action. That was very rewarding to see. Finally, there's a volume production process in place. The risk of that is actually pretty much -- read higher at this point. Sam Peterman: Okay, that's great. That's all for me. Thanks guys. Operator: And ladies and gentlemen, with that, we'll be concluding today's question-and-answer session. I'd like to turn the floor back over to management for any closing remarks. Jun Pei: Yes. Thank you again for joining this conference call. Cepton is at a very enviable position of supplying Ultra Cruise and being sole sourced for the Ultra Cruise program into many platforms of cars in this very competitive marketplace that really differentiated us in this year and the coming years will be the years of execution. Please pay your attention to us as we execute this program and you'll see cars with our LiDAR on the road. Operator: Ladies and gentlemen, with that, we'll conclude today's conference call and presentation. We do thank you for joining. You may now disconnect your lines.CPTN Ratings Summary
CPTN Quant Ranking
Related Analysis
Cepton, Inc. (NASDAQ:CPTN) Quarterly Earnings Report Anticipation
Cepton, Inc. (NASDAQ:CPTN) is gearing up to share its quarterly earnings report on Monday, May 13, 2024, after the market closes, drawing significant attention from investors and analysts alike. The anticipation is rooted in Wall Street's expectations, where earnings per share (EPS) are estimated at -$0.42, alongside a projected revenue of approximately $4.4 million for the quarter. This upcoming report is crucial as it offers a glimpse into the company's financial health and operational efficiency during the first quarter of 2024.
Cepton, Inc., a trailblazer in the high-performance lidar solutions sector, is not just about numbers. The company, nestled in the innovation hub of Silicon Valley, is renowned for its cutting-edge automotive technologies. The forthcoming financial results will not only shed light on the company's earnings and revenue but will also include a comprehensive business update. This dual focus underscores Cepton's commitment to transparency and its ambition to maintain a leading position in the rapidly evolving automotive technology landscape.
In addition to the earnings report, Cepton has arranged a conference call and webcast for 2:30 p.m. PT (5:30 p.m. ET) on the same day, allowing investors and interested parties to delve deeper into the company's performance and strategic outlook. This interactive session represents an invaluable opportunity for stakeholders to gain insights directly from Cepton's leadership, fostering a deeper understanding of the company's trajectory and operational nuances.
For those keen on participating in the live call, Cepton has made provisions for both toll-free and international access, ensuring that a broad audience can engage with the company's executives. Furthermore, a live webcast will be hosted on the company's investor relations website, with a telephonic replay available shortly after the live event concludes. This level of accessibility highlights Cepton's dedication to inclusivity and stakeholder engagement, reinforcing its reputation as a forward-thinking entity in the tech industry.
Reflecting on Cepton's previous quarterly performance, the company reported revenue of $4.95 million alongside a net loss of $8.32 million. These figures, coupled with a gross profit of $2.7 million and an operating loss of $9.2 million, paint a comprehensive picture of Cepton's financial landscape. The detailed breakdown, including an EBITDA loss of $8.65 million and an EPS of -$0.52, sets the stage for the upcoming earnings report, providing a benchmark against which the company's quarter-over-quarter progress can be measured.
