ASML Holding N.V. (ASML) on Q3 2023 Results - Earnings Call Transcript
Operator: Good day and thank you for standing by. Welcome to the ASML 2023 Third Quarter Financial Results Conference Call on October 18th, 2023. At this time, all participants are in a listen-only mode. After the speakers' introduction, there will be a question-and-answer session. [Operator Instructions] Please be advised that today's conference is being recorded. I would now like to hand the conference call over to Mr. Skip Miller. Please go ahead.
Skip Miller: Thank you, operator. Welcome everyone. This is Skip Miller, Vice President of Investor Relations at ASML. Joining me today on the call are ASML's CEO, Peter Wennink and our CFO, Roger Dassen. The subject of today's call is ASML's 2023 third quarter results. The length of this call will be 60 minutes and questions will be taken in the order that they are received. This call is also being broadcast live over the Internet at asml.com. A transcript of management's opening remarks and a replay of the call will be available on our website shortly following the conclusion of this call. Before we begin, I'd like to caution listeners that comments made by management during this conference call will include forward-looking statements within the meaning of the federal securities laws. These forward-looking statements involve material risks and uncertainties. For a discussion of risk factors, I encourage you to review the Safe Harbor statement contained in today's press release and the presentation found on our website at asml.com and in ASML's Annual Report on Form 20-F and other documents, as filed with the Securities and Exchange Commission. With that I'd like to turn the call over to Peter Wennink for a brief introduction.
Peter Wennink: Thank you, Skip. Welcome to everyone. Thank you for joining us for our third quarter 2023 results conference call. Before we begin the Q&A session, Roger and I would like to provide an overview and some commentary on the third quarter 2023 as well as provide our view of the coming quarters. Roger will start with a review of our third quarter 2023 financial performance with added comments on our short-term outlook and I will complete the introduction with some additional comments on the current business environment and on our future business outlook. Roger, if you will.
Roger Dassen: Thank you, Peter, and welcome everyone. I will first review the third quarter financial accomplishments and then provide guidance on the fourth quarter of 2023. Let me start with our third quarter accomplishments. Net sales came in at EUR6.7 billion, which is around the midpoint of our guidance. We shipped 10 EUV systems and recognized EUR1.9 billion revenue from 11 systems this quarter. Net system sales of EUR5.3 billion, which was mainly driven by Logic at 76% with the remaining 24% coming from Memory. Installed Base Management sales for the quarter came in at EUR1.4 billion, as guided. Gross margin for the quarter came in at 51.9%, which is above our guidance, primarily driven by DUV product mix as well as some one-off cost effects. On operating expenses, R&D expenses came in at EUR992 million and SG&A expenses came in at EUR288 million, both basically as guided. Net income in Q3 was EUR1.9 billion, representing 28.4% of net sales and resulting in an EPS of EUR4.81. Turning to the balance sheet, we ended the third quarter with cash, cash equivalents, and short-term investments at a level of EUR5 billion. Moving to the order book, Q3 net system bookings came in at EUR2.6 billion, which is made up of EUR0.5 billion for EUV bookings and EUR2.1 billion for non-EUV bookings. These values also include inflation corrections. Net system bookings in the quarter were driven by Logic with 80% of the bookings, while Memory accounted for the remaining 20%. As expected, we did see some moderation in orders this quarter. As the industry is working through a cycle, customers remain cautious in the current environment, managing cash flows and delaying purchase orders. In addition, there were no High-NA orders this quarter. While our bookings were lower than in previous quarters, our backlog at the end of Q3 remained strong at over EUR35 billion. With that, I would like to turn to our expectations for the fourth quarter of 2023. We expect Q4 net sales to be between EUR6.7 billion and EUR7.1 billion. We expect our Q4 installed Base Management sales to be around EUR1.4 billion. Gross margin for Q4 is expected to be between 50% and 51%. The positive impact of higher sales volume is more than offset by the dilutive impact from a change in DUV mix and one-off effects relative to last quarter. The expected R&D expenses for Q4 are around EUR1.03 billion and SG&A is expected to be around EUR285 million. Our estimated 2023 annualized effective tax rate is expected to be between 15% and 16%. An interim dividend of EUR1.45 per ordinary share will be made payable on November the 10th, 2023. In Q3 2023, we purchased shares for a total amount of around EUR100 million. As mentioned in previous quarters, in the current environment, we expect to see ongoing pressure on our free cash flow. As a result, we will be prudent in managing our cash flows and maintain relatively high levels of cash. With that I would like to turn the call over to Peter.
Peter Wennink: Thank you. Thank you, Roger. And I have a bit of a cold, so apologies. As Roger has highlighted, another good quarter, especially considering the current market environment. Uncertainty remains in the market, driven by global macro concerns around inflation, rising interest rates, lower GDP growth in certain economies and the geopolitical environment, including export controls. However, the industry seems to be passing through the cycle trough. There has been some improvement in end market inventory levels downstream, sorry, I have to get a bit of water, although inventory levels upstream remain elevated. As a result, our customers continue to moderate wafer output by running at lower utilization levels. While lithography tool utilization are still running at levels lower than normal relative to last quarter, tool utilization in Logic continues to show signs of improvement, while Memory has yet to turn. We concur with our customers that still expect to see an inflection point, indicating the start of a recovery by the end of the year, although the shape and slope of the recovery remains uncertain. Looking further ahead to 2025, we expect a significant growth year since more than 50% of our EUV and DUV shipments will go to new fab projects. On top of this, we expect existing fabs will be adding capacity, driven by continued recovery cycle. Turning to our business, we now expect DUV revenue to grow towards 55% year-over-year, an increase from around 50% communicated last quarter, primarily driven by an increase in immersion revenue. China demand for DUV systems continues to be strong, a trend we talked about in previous quarters. For system shipments this year to Chinese customers, the majority of the orders were booked in 2022. The demand fill rate for our Chinese customers over the last two years was significantly less than 50%. So the Chinese customers were in fact receiving a much lower number of systems than they ordered. This was due to the fact that timing from other customers that, sorry, this was due to the -- to the fact that the demand for our systems worldwide significantly exceeded supply. With current shifts in demand timing from other customers, we now have the opportunity to fulfill these orders to our Chinese customers. So supply is in fact catching up to demand, and we're shipping lithography systems for mature and mid-critical nodes to China, while of course complying with export control regulations. If you combine this with the fact that other customers are delaying their demand, this means indeed a higher sales percentage from China than we saw in previous years. In EUV for 2023, we continue to expect year-over-year revenue growth for EUV of around 25%, as communicated last quarter. For the Installed Base business in 2023, the current utilization rates, market uncertainty, particularly as it relates to the timing of the recovery, customers continue to wait to perform productivity and performance upgrades on the litho systems. Therefore, we now expect our Installed Base business this year to be down around 5% from last year versus the flat growth previously communicated. In summary, based on our full year with higher DUV revenue offset somewhat by lower expectations on our Installed Base business relative to last quarter, we still expect net sales for the year to grow towards 30% with a slight improvement in gross margin compared to 2022. Overall, a very strong growth year, especially considering the industry being in a down-cycle. On the geopolitical front, as it relates to export controls, the US government yesterday published updated export control regulations. Part of the regulations is an update from last year's October communication and part is the implementation of the US regulation on the trilateral agreement between the Dutch, Japanese, and US governments. Given the length of the document, we need to review the final regulation thoroughly and make a detailed analysis, which will take some time. But based on our preliminary assessment, we do not expect these measures to have a material effect on our financial outlook for 2023. The export control measures could have an impact on the regional split of our shipments in the medium to long term, but we do not expect an impact on the global demand scenarios, as communicated during our Investor Day in November last year, since the long-term growth perspectives for our industry remains clearly unchanged. Looking towards next year, the semiconductor industry is currently working through the bottom of the cycle and our customers expect the inflection to be visible by the end of this year, as I mentioned before. Although there is an opportunity for some demand to be pulled back into the back half of 2024, we currently prefer to take a more conservative view for the full-year 2024, especially considering the inherent nature of the macroeconomic uncertainties. Therefore, based on our current view, we expect the revenue next year to be similar to 2023. As such, we see 2024 as a transition year, but also as an important year to prepare for the significant growth that we expect in 2025. Now, based on discussions with our customers, we currently expect 2025 to be a strong year, driven by a number of factors. First, the secular growth drivers in the semiconductor end markets, which we have previously discussed, such as energy transition, electrification and AI. The expanding application space, along with increasing lithography on future technology nodes drives demand for both advanced and mature nodes. Secondly, the industry expects to be in the middle of a cyclical upturn in 2025, starting in 2024. And lastly, as mentioned earlier, we need to prepare for the significant number of new fabs that are being built across the globe. These fabs are spread geographically, are strategic for our customers, and are scheduled to take our tools. It is essential that we keep our focus on the future and build capacity to be ready for this ramp. In summary, despite going through an industry downcycle, we still expect very strong growth in our business this year, and while there are still significant uncertainties primarily driven by the macro environment, it appears that we're passing through the bottom of this specific cycle, and the shape of the recovery will ultimately determine the demand curve beyond 2023. In the near term, it's understandable that customers remain cautious as they moderate wafer output to help lower inventory levels in the supply chain and look to build confidence around the timing and slope of the recovery next year. In summary, we clearly view 2024 as a transition year as we prepare for future growth and expect strong year in 2025 and beyond. We remain confident that we are well positioned for further long-term growth, as we discussed in the market scenarios for 2025 and 2030 during our Investor Day in November 2022. With that, we will be happy to take your questions.
Skip Miller: Thank you, Roger and Peter. The operator will instruct you momentarily on the protocol for the Q&A session. Beforehand, I'd like to ask you that you kindly limit yourself to one question with one short follow-up, if necessary. This will allow us to get to as many callers as possible. Now, operator, could we have your final instructions and then the first question, please?
Operator: Thank you. [Operator Instructions] We will now go to the first question and your first question comes from the line of Joe Quatrochi from Wells Fargo. Please go ahead.
Joe Quatrochi: Yeah. Thanks for taking the questions. Curious, embedded in your expectation for more muted kind of 2024. How do we think about the gross margin puts and takes just given there's several moving parts in terms of like mix and you guys are obviously increasing your manufacturing output for later years and then I think there's some benefits from higher EUV ASPs. At the same time, you're also going to start shipping the initial High-NA tools as well.
Roger Dassen: Yeah. Joe, you're doing a very fine job in analyzing it all. Of course, you will appreciate that we're not going to give guidance on you know quantitative guidance on the gross margin for next year, but I can give you some of the -- some of the drivers of the gross margin. And I think you mentioned a few of them, which are quite important. So I would say the 3800s ASP is clearly one, right? So 3800 is going to be an important part of the mix in next -- next year for EUV, so obviously, has a higher ASP. We talked about more than EUR200 million last -- on the call last quarter. So that comes with a higher ASP, but also drives -- drives the gross margin. So that's an important driver. I think service on EUV is one where we say we continue to make progress on that one. So that's another -- that's another positive. I would say on the challenge side, so on the headwind that we're going to get in terms of gross margin for next year, it is, as you said, next year we are preparing obviously for a big year in 2025 because that's the way we look at it. As we also mentioned -- as Peter mentioned and as we also said in the video, going to be a big year, and that means that we're going to add quite some capacity to actually allow that to happen. So that's going to have a headwind on the gross margin because those people will have to be trained in 2024 whilst primarily being productive only in 2025. And also on High-NA, you know, the High-NA numbers next year obviously are very, very small in terms of revenue and also output, but we are obviously preparing our workforce, both in the factory, but also in the field to accommodate the '25 and beyond ramp of High-NA. So obviously that also, same story, lot of people that will be added there, and will be a drag on the gross margin for 2024. Question mark obviously is on the Installed Base business. That can go positively, can go negatively on the gross margin, very much dependent on how the upgrade business will come back in 2024. And then finally, in light of all the puts and takes that you might think of in terms of revenue, also in light of what was -- what Peter just said, the China export controls, you could maybe see less immersion tools into China, also less on the high end. So that could also be a bit of a headwind on gross margin. So that's it really, Joe. Those are all the puts and takes I would see it today and in the Q1 -- in the Q4 call, so in January of next year, I think we have a much better handle on how those -- all of those pan out.
Joe Quatrochi: Got it. Thanks for that. And then as a follow-up, just wanted to reconfirm, for fast shipments, you're expecting still to exit this year in terms of revenue not recognized in the EUR2.3 billion range, and then does that get caught up next year as part of kind of a more muted growth that you're able to catch up to that demand?
Roger Dassen: I think Joe, part of it will. The way we look at it today, but again, we will confirm that in more detail in January, but the way we look at it today, we expect less fast shipments by the end of '24 than we would have by the end of '23. So there would be a positive effect from fast shipment in the number for next year.
Joe Quatrochi: Got it. And that EUR2.3 billion is still the right number exiting this year?
Roger Dassen: The EUR2.3 billion is what we're currently driving towards. Yeah. That's what we expect at this stage to have shipments this year not recognized in revenue this year. Correct.
Joe Quatrochi: Perfect. Thank you.
Operator: Thank you. We will now go to our next question. And the next question comes from the line of Krish Sankar from TD Cowen. Please go ahead.
Krish Sankar: Yeah. Hi, thanks for taking my question. I have two of them. When you look into calendar '24, how to think of from a unit standpoint, EUV and DUV? How do we look at unit for EUV and DUV in 2024 relative to 2023? Would it be up, down, similar? Any color there would be helpful, and then I had a follow-on.
Peter Wennink: Yeah. I think on the DUV, I think Roger said it in the answer to the previous call. In the DUV, of course, we've had a great year for China because we were basically delivering out of the backlog. These guys ordered and the orders were there that were prepaid, and we had the opportunity to ship. I don't think that will repeat itself in that volume so much next year. And on top of that, of course, there is a new export control regulation that will put, let's say, as a handful of Chinese fabs under the export control rules where we cannot ship immersion tools. It's just a handful of, but it's -- it is still -- it is still sales that we had in 2023 that we'll not have in 2024. So I think DUV could see some reduction, based on that now, if then sales stay the same or at the similar level then EUV grows, but there -- what Roger also said as an answer to the previous question, we do expect that fast shipments going out of 2024 will be lower. So there's going to be, you could say, an accounting windfall on the top line. So I think all-in-all, this is a bit of the picture, so somewhat lower DUV units. EUV units could be lower because of the fact that we actually have -- although we could see revenue increase as a result of the fast shipment move, could indeed be also somewhat lower, but with higher sales prices. So this is what the picture is for next year. Now, like Roger also said, for the January after the fourth quarter results is probably the better time to go into bit more detail, but directionally, that's what you can expect.
Krish Sankar: Got it. Got it. That's very helpful, Peter. And then on China, I understand it was like 46% of sales last quarter. Probably average is around 30% for the full year. If you strip out the export control issues or the geopolitics, a lot of these spending is on mature nodes. Kind of curious how long do you think this level of spending is sustainable or do you think at some point there is going to be a natural consolidation or rationalization of this spending? Thank you.
Peter Wennink: Yeah. I think you have to -- you have to understand where these tools are being used for. The vast majority of our shipments to China is mid-critical to mature and that's really where our business is. Of course, like I said earlier, there's a handful of fabs, not customers, fabs that have been identified as ready for advanced semiconductor manufacturing. So those will -- those are now excluded, but the vast majority is mid-critical to mature. Will that level off? I don't think so. And why don't I think so? Because you need to realize where those chips are being used for. I mean, China is by far -- over 50% of all worldwide investments in renewable energy is in China. That's wind, that's solar, that's the buildout of the grid, the electrification. The buildup of the EV manufacturing capacity in China is significant. Industrial IoT is a significant driver. Next to that is also the continuous telecommunications infrastructure rollout. That's all mid-critical to mature stuff. And as it happens, China invests a lot there. It's a big country, 1.4 billion people. So there is a lot of semiconductor need, and this is exactly when we look at the expansion plans of our Chinese customers. It's exactly what they -- where they are putting their capacity at work in these areas. And if you look at the total consumption of semiconductors by the Chinese manufacturing industry, then China imports more semiconductors than they import oil. On top of that, you see the significant increase in these new transitions. That means that if China wants to come to a certain level of self-sufficiency, yeah, have still a huge gap to cover to be completely self-sufficient. So it's also logical that they actually invest in this type of semiconductor technology because it's for internal use. And I think so it's -- I don't think we will see a peak this year and next year, but I think there will be going forward a significant demand coming out of China for mid-critical and mature technology, and for all the reasons that I just mentioned.
Krish Sankar: Got it. Thanks a lot, Peter. Thank you.
Operator: Thank you. We will now go to the next question and your next question comes from the line of Aleksander Peterc from Societe Generale. Please go ahead.
Aleksander Peterc: Yes. Hi. Good afternoon and thank you for taking my question. Could you help us understand what is the percentage of shipments into China this year that would actually fall under the restrictions that will be in place for the 1st of January next year? That would be my first question. And then the follow-up, just very briefly, you could tell us how far out you're currently booked in EUV into 2024 or for in DUV. Thank you.
Peter Wennink: Yeah. I'm just writing down. So on the China growth, what -- the percentage shipment this year that is now excluded, it's anywhere between 10% and 15%. So the vast majority is mature and mid-critical. And I think like I said in the answer to the previous call, I think that is what will basically remain because of the buildout of that capacity is actually needed for all the transitions that I just mentioned. So it's 10% to 15%.
Aleksander Peterc: Thank you.
Roger Dassen: And on the EUV backlog, I mean, we're currently looking at a backlog of around EUR19 billion for EUV, but of course, that is a combination of the shipments that we still have to go this year and then for '24 and '25. And by the way, it also includes High-NA. So that's a -- so there is a substantial part of the shipments that we envisage in '24 are included, but not everything, but a substantial part is covered by the EUV backlog, as I just referenced it.
Aleksander Peterc: Okay, great. Thank you. It's just that 3800 will be -- so next year is all 3800, right?
Roger Dassen: No, no. Next year will be a mix of 3600 and 3800.
Aleksander Peterc: Thank you.
Roger Dassen: You're welcome.
Operator: Thank you. We will now go to the next question and your next question comes from the line of Sara Russo from Bernstein. Please go ahead.
Sara Russo: Hello. Thanks for taking my question. So in your result package, you had indicated that you're seeing Memory utilization remaining on the low side, and -- but you are beginning to see some recovery in Logic and sort of indicated a potential bottoming of the cycle later this year. Can you give us any more specifics on the utilization levels and trends across Memory versus Logic? Any difference -- like more specifics on the differences you're seeing across those end markets?
Peter Wennink: No, I'm not going to give you precise utilization levels because they're all different for our customers, but it is bottoming out on Logic. That's what we've seen. I think we've already indicated that I think last quarter that we saw this very early first indication. I think that has continued, yeah, so which is good. But also I think that you have -- need to look at that in the context of what I said earlier that inventory levels downstream are normalizing and upstream, they're still a bit elevated. So this is in that context that that makes all sense. I think on Memory, we don't see that -- that upturn yet, so we just have to look at and just follow this closely when that will happen, but generally when we see this upturn in Logic, somewhere down the line, Memory will follow. It's -- Logic working without Memory is not -- is -- does not make sense either. So it's probably a timing issue, but we'll follow it closely. And like I said, there are other indications. Also some articles that I just read last week from Korea that for the first time in 12 months, you see NAND shipments going up, first indications of DRAM spot prices going up now. So these are early indicators. So that's why our expectation is that what we've seen for Logic now over the last three months will also follow in Memory.
Sara Russo: Great. Thanks. And maybe just a follow-up on the backlog topics. So I mean, in the past, you've given us a sense for what share of the backlog is China demand and it's sort of a lot of 2022 orders led to the significant increase in China. Have you seen that shift at all? It was sort of sitting around 20%. Is that shifted down now that you're able to ship more to China and meet more of those orders? Has that come down or does that continue to remain in that range?
Peter Wennink: No, I think it's the -- I think it's the same. I think we said the China part of our business this year could be over 20%, and I think it's about the same range for the backlog. Yeah. So that has remained the same.
Sara Russo: Great. Thank you very much.
Operator: Thank you. We will now go to the next question, and your next question comes from the line of Francois Bouvignies from UBS. Please go ahead.
Francois-Xavier Bouvignies: Thank you very much. So two quick ones from me. The first one is on maybe 2025. So you gave your market low and market high scenario at your Capital Markets Day. Now, looking at the current macroenvironment, I guess, for many people, it's actually we are more in the low market scenario at least today in terms of macro. If we look at your guidance on 2025 and taking into account the geopolitical environment, should we lean towards the low end of your guidance in a way? I mean, it would still imply a significant recovery in 2025, but I just wanted to check if it's fair to assume given the current utilization rate in the industry and the pushout that you are also seeing on your side, if we should lean towards the low end of your guidance. And I have a quick follow-up.
Peter Wennink: Well, I mean, let me explain the following. I think our industry is cyclical when we're in a downturn, and the deeper that downturn is, the higher the upturn. And that's simply because the underlying trend, the secular trend of the capacity that is needed to support all these transitions that we all talk about, and we all believe in, it has a downturn for whatever reason, could be macro, could be macroeconomic shocks. The deeper the downturn is, the higher the upturn. That has been -- you just look at the 30-year cyclical behavior of our industry. That's exactly what is always happening, and it makes sense because the underlying trend is there. Now, having said that, in my introductory comments, I actually had three reasons for why we believe 2025 is going to be a very strong year. One is these secular trends. They are there, and also actually will -- actually means that we need to build the capacity to support those trends. And if you don't build the capacity in 2023, 2024, and for Memory, it even started earlier. It started in mid-2022, then it will have to be there to support those secular trends, which we all believe in, so and also going back to that, that's number one. Number two, in answer to the previous question, it feels like, and also our customers keep telling us that they feel that it's a trough, we're in this trough or we're very close. And that means they will see growth in 2024. You could argue about the slope of the growth because of macroeconomic uncertainties, but you all tell us please prepare for 2025. So they strongly believe that growing in 2024, and it will probably start slow, but will accelerate into 2025. So it tells be ready. That's number two. Number three, when you look at the number of new fabs that are being opened geographically, fab extension that will -- that will need machines in Europe, in the US, across Asia, yeah, then that is already -- when we look at the demand, already more than 50% of our 2025 forecasted demand is on new fabs for DUV and EUV. So if you put it all together, also realizing that we actually look at 2024 and '25 together. Why is that? Because our lead times are more than 12 months, yeah, that for EUV, they are a year and a half. So we need to have that very close connection with our customers, and we have these insights into these new fab expansions. Not so much where they are going to add capacity for the existing fabs because that's basically that is a -- that is a -- that is a question of where the cycle is, but if you take those three things together, and then we look at the demand that we're currently discussing with our customers, then 2025 is a very strong year, and a very strong year doesn't jive with your low end of the guidance. So it's -- again it's the cyclical nature of this industry. We are now -- let's take Memory. If 2024 is not a full recovery year, then Memory is in a downturn of two and a half years. Now, just look at it historically, always followed by a strong recovery. Same is true for Logic. And if we look at those building blocks -- of those three building blocks, that gives us the conviction at this moment in time that 2025 is going to be a -- is a very strong year. But then we need to prepare 2024, we can simply not wait until first quarter 2025, and then we -- and then we start accelerating because the supply chain won't be there. Our lead times are simply too long. So we have to prepare that also in the year 2024. That's why it's a transition year. We look at '24, 2025 together. Why? Because the lead times of our tools and discussions with our customers are actually supporting all of that. Sorry for the long answer.
Francois-Xavier Bouvignies: No, no, no. That's very clear. Thank you. And maybe as a follow-up then, if we have long lead times and strong recovery in 2025, the orders, I mean, this quarter has been, let's say, quite low compared to many people expected, but if you expect a very strong year in 2025 and the lead times that you are describing.
Peter Wennink: Yeah, yeah.
Francois-Xavier Bouvignies: Do we expect that to see in the order behavior in the first half of 2024? I mean, if we take into account your lead times or how should we think about that because we should see the improvements of that, right?
Peter Wennink: Absolutely. Yeah, no, I think that's absolutely true. We are in Q3 of the 2023, and we have more than EUR35 billion in the backlog. If you are a customer, you can actually wait, you know, because they -- you also see 2024 as a recovery year. Is it going to be Q3, Q4, Q1? So when is it? So they will just wait because they don't need. They have the capacity. If they want the capacity, they can just call it off. Yeah. So -- but indeed, you are right. If 2025 is the kind of strong year that we expect, then indeed you would have to see the order recovery in the first half of 2024, absolutely. Yeah.
Francois-Xavier Bouvignies: Great. Thank you, Peter.
Operator: Thank you. We will now go to the next question, and your next question comes from the line of Rolf Bulk from New Street Research. Please go ahead.
Rolf Bulk: Yes. Thank you for taking my question. In your prepared remarks, you mentioned shifts in timing of say your western customers, their demand profile. Could you give us a bit more detail on this? Are these pushouts primarily on the leading edge or is it more trailing edge? And has this trend of pushouts increased in recent months?
Peter Wennink: Yeah. I think when you think about trailing edge, I mean, we did not see pushouts from many of our trailing edge customers because many of them are in China, but even the ones that are not in China, because they are supplying the mature market, which, for instance, supplies the automotive industry and industrial IoT, they actually kept pretty -- pretty -- pretty strong. They were pretty healthy. So it is more in, you could argue, the leading edge than it was in the mature area, and but don't forget, leading edge doesn't only need high-end DUV or needs high-end immersion. It only -- also needs mature. It needs KrF, it needs i-line. So -- but if you want to split this, then the demand shift was probably more in those areas where -- which is logical, look at the end markets, you know, smartphone sales, yeah, PCs. This -- the end markets where -- and that is where the inventory was. So this is also the area where you see the demand shifts, but healthy or let's say relatively healthy was more in the mature space and in -- and of course China because we heavily under-shipped these customers, which of course, with their orders in the order book and all -- and most of them were to a large extent prepaid, of course, we will ship those tools to them if others don't want them, and that's all mature.
Rolf Bulk: Thank you. It's very clear.
Operator: Thank you. We will now go to our next question, and the next question comes from the line of Didier Scemama, Bank of America. Please go ahead.
Didier Scemama: Yeah. Good afternoon. It's Didier Scemama from Bank of America. I have a couple of questions. First, I wanted to just probe you a little bit again on 2025 revenue guide. I think you answered pretty well, but I guess what I wanted to ask you is, if we don't see those bookings coming through in the first half of '24, is that roughly in July '24 where you would consider changing that guidance or at least telling us that you would be towards the low end of that range or even below that? And I've got a follow-up. Thank you.
Peter Wennink: Well, you by now know us, Didier, because we know each other for a long time. We just tell you how it is, how we see the world at the moment that we have this call. This is how we see the world. So if we see the world by Q1 of 2024 different, we will tell you, if we see it different by Q2 of 2024, we will tell you. So this is what we currently see, what we currently believe. If the world turns out to be completely different, better or worse by the middle of 2024, we will tell you. So I cannot say -- I cannot answer that question other than, we'll just tell you how it is.
Didier Scemama: No, makes sense. Second part on China restrictions. Is there anything you can share with us with regards to the sort of tools that might not be allowed to be shipped to those fabs? I mean, should we consider the 1980 to be part of the banned tools for those particular fabs, but that you could ship it to other China customers? Or is it too early to say at this stage?
Peter Wennink: No, no. I think that's probably not too early. It is -- it is as you indicate. So the way we read the rules now, and of course you can imagine that, that part of the regulation, we've read pretty carefully, that the principle is that in -- that in principle, also the 1980s would fall under the export control restrictions, but only when those immersion tools are used for advanced semiconductor manufacturing. And those advanced semiconductor manufacturing, we've been informed, only applies to a handful of fabs. Yeah. So that means that the 1980, for that -- for those handful of fabs, is off limits, but not for the vast majority of our Chinese customers, for which we don't need an export control license either. We can just ship. Yeah. And those are for the mature and lower mid-critical chips that are needed for all the transition that I just mentioned. So, yeah.
Didier Scemama: Okay.
Peter Wennink: Yeah.
Didier Scemama: All right. So that means the majority of your immersion revenues next year in China will be -- at least some of the 1980, but probably move to 1950, 1930 sort of things for those customers.
Peter Wennink: No, no, because the 1980 is a low-end immersion tool. So the only export controls will be on the 1980s that go to a handful of fabs. Yeah.
Didier Scemama: So you'll ship the 1980? Yeah.
Peter Wennink: Yeah. And for all the other customers, which are using those chips for non-advanced semiconductor manufacturing that is actually used for mid-critical, lower mid-critical, mature applications where there are no security concerns. Yeah. We can just ship those. And that's --
Didier Scemama: Brilliant. Thanks very much.
Peter Wennink: And that's the vast majority of our business.
Didier Scemama: Perfect. Thank you, Peter.
Operator: Thank you. We will now go to our next question and the next question comes from the line of Mehdi Hosseini from Susquehanna. Please go ahead.
Mehdi Hosseini: Thank you. A couple of questions. Peter, I am a little bit confused, and I'm just going to focus on lithography, not going to ask you about WFE or we are in the semiconductor cycle. When I look at the leading edge, we've had a couple of years of a slow start to three nanometer. As a matter of fact, the leading edge has been trending in a half pitch, and I was hoping that by next year, there will be a bigger demand for leading edge among Foundry and your Logic customer, but what I get from you is probably EUV unit shipment is going to decline. What I want to ask you or get a clarification, is this a kind of a pause as we insert a gate-all-around? Is this something that happened when we went from planar to FinFET and we're going to see the repeat of that next year and then that would impact your EUV shipment? Any thought around gate-all-around would be appreciated. And I have a follow-up.
Peter Wennink: You know, I think gate-all-around and the nodes associated with that are 2025, 2026 high-volume ramps, yeah. That will happen. Yeah. So that -- so the pause of, let's say, the pause or a lower unit shipment of EUV next year is simply the cost of what we discussed earlier. I mean, we're in a cyclical downturn and there are end markets that don't need that full capacity. So this is the reason. The R&D roadmaps are very much intact. Yeah. And as a matter of fact, our leading customers keep telling us this. Yeah. So I would not expect, I would even say, if you would see the HVM volume ramp, yeah, on the gate-all-around architecture, it's just a reason -- one of the reasons why I think 2025, 2026 is going to be a good year. It's a very strong year. Yeah. But everything that we see today, it's got nothing to do with that. It's got nothing to do with the roadmap. It's got -- just got to do with the fact that we are in a downcycle and we're climbing out of the downcycle whereby the capacity utilization also at the leading edge is, of course, not at 100%. Yeah. You just have to grow into it and it's got to happen because it's just the cycle.
Mehdi Hosseini: No, one difference this time compared to when we migrated to FinFET is DRAM, adoption of -- insertion of higher EUV layer count for DRAM. If I were to go back to your 2022 and 2021 Analyst Day, you highlighted the fact that more than 30% of EUV demand by 2025 is going to be driven by DRAM. Is that still the case and could that make the EUV recovery much stronger with or without the adverse impact of a transistor change?
Peter Wennink: Yeah, I think that's absolutely true, but I still believe that percentage is still valid, but like I said, it is not today, but it is because we are where we are in the economic cycle. Yeah. So I think nothing has changed in that sense. And you could even argue because they have quote-unquote under-invested in '23, '24, there will definitely be an additional driver on top of the roadmap insertion points that haven't changed. Yeah. So, yes, I mean, I would expect that to be the case in 2025. Yes.
Mehdi Hosseini: We just have to wait for the first half of '24 to see that in your bookings.
Peter Wennink: Yeah, yeah. And that is basically also, I said it before, you know. Why we are conservative on 2024? Because of the macroeconomic uncertainties, yeah, and our customers are closely watching this also. They are watching these inflection point trends. I mean, this is what we will also follow with them. They have a better view of inventories. We have a better view of utilization. We have a better view of a lot of things that happen in the fab. We need to look at those inflection points and saying, okay, that means the trough, but then what will be the slope of the recovery, and that's basically a macro call.
Mehdi Hosseini: Thank you.
Operator: Thank you. We will now go to the next question, and your next question comes from the line of Sandeep Deshpande from JPMorgan. Please go ahead.
Sandeep Deshpande: Yeah. Hi, thanks for letting me on. Peter, I mean, with response to an earlier question, you talked about that you will start seeing this order recovery potentially in 2024, which will help your 2025, but given that at this point what you see into 2024, the demand is not as much as your capacity, particularly in EUV, would you prebuild because, I mean, your tools don't have any obsolescence risk? This is my first question and then I have one quick follow-up.
Peter Wennink: Yeah. I think you're absolutely right. I mean, we are very -- also our customers keep telling us this, you know. This is not that we in perfect isolation on the 20th floor in a town called Veldhoven think about this. It's because our customers also show us what they need and why. So this is the 2025 we think is very real. So that means we need to pre-build, yeah, so you will see that in our working capital and the working capital of our suppliers. And if things change a bit faster, we'll actually need that in the back half of 2024. So we need to prepare ourselves, but you're absolutely right, because otherwise we won't be able to react and then we're in a super crisis in 2025 because we can't make the tools that our customers want. Yes.
Sandeep Deshpande: And then -- thanks, Peter. And then in terms of a follow-up for Roger, I mean, next year is -- if you're looking at a flattish year, I mean, you must have had a spending plan on your OpEx for next year, whether it's R&D or SG&A. Are you going to continue with that plan, given that the environment has -- is different from when you built that plan or are you going to continue spending as you would normally have done and thus there is an earnings impact next year in a flattish year because, you know, you've got an upward trajectory on your expenses?
Roger Dassen: Yeah. Sandeep, so obviously in the current environment, we are frugal, right, as you might expect us to do. So we're definitely controlling our SG&A expense there. On the R&D side, that's long-term, and I think we would be ill-advised to now go cut our R&D roadmap, and that's not what we're doing, right? So we are continuing to execute on the R&D roadmap. You might have seen that on the hiring of people, we slowed down a little bit this year. So part of that is in response to what I've just mentioned on SG&A. It's also in response to the fact that in 2022, we hired 10,000 people. So on the 42,000 people that we have today, that's massive. So obviously you want a certain level of absorption to happen there, and that's exactly what we're doing, right, making sure that people are well absorbed, that the growth also on the R&D headcount is nicely absorbed. So that's why you see this slowing down a little bit on hiring, hiring people, but no, I mean, we continue to push down the accelerator on the R&D front because the opportunity is significant. And in order for us to achieve the growth trajectory that we've talked about in '25 and 2030, we simply need to do that. So, yes, we will be frugal. No, we're not going to cut back on our R&D roadmap.
Sandeep Deshpande: Thank you so much.
Operator: Thank you. We will now go to the next question and your next question comes from the line of Janardan Menon from Jefferies. Please go ahead.
Janardan Menon: Hi. Good afternoon. Thanks for taking my question. I just wanted to go back to the question of the backlog. You do have a sizable backlog of over $35 billion and over $19 billion on the EUV side. So just referring to a previous question on pushouts, do you see a risk, I mean, if you were to look out into 2024, especially on your EUV side, is your uncertainty more on do you get any pushouts on the existing backlog, or is it a question of how many orders you can take in Q4 for shipment into 2024? My question is more -- you've said that it's -- that you've suggested that there's some conservatism in that, and I'm just wondering where the risk or the upside could come from. Is it more that there could be a risk of pushouts, or is it just the amount of orders you could take in Q4? Thanks.
Peter Wennink: Yeah. I think that's a good question, Janardan. The way that we look at this is, we look, one, of course, we are close contact with our customers, and we -- and we are discussing in depth with them what they really need. But what they really need is also a function of where they are, and what they see that they need going forward. And of course, where they are is they're in a clear -- all of them are in a downcycle where they feel it's about the trough or we might be seeing the inflection points that will take us out of the trough. So if you then think about the psychology of the customer, and they look forward and they see these inflection points towards the end of the year changing positively that means they will grow in 2024. That means what we discuss with them now as the, you can say, the minimum scenario, if everything happens the way that we think in terms of the inflection points, they will see growth, then I think this will be it, but that, of course, is -- that is -- in their current mind, they don't give us a lot of orders. So their current mind is, we have what we have, we look forward to what we need as a minimum in 2024. They better tell us. They tell us, you better prepare us for 2025, but the minimum in 2024 is what we call the conservative view because you could have a more positive view and say, well, it will turn in the second half of 2024. We don't have any indication that it's going to be that soon. So this minimum position that they see is what they have discussed with us. And seeing those inflection points, I think there is little risk to the downside, to answer your question. Now, could there be -- could there be an opportunity to the upside? That would effectively mean that what we see in 2025, for reasons of a faster recovery in the cycle, will be pulled in into the back half of 2024. That could be -- that could be an upside, yeah, but this is where we are. This is where our thinking is, and this is where thinking of our customers is, and this is how we reflect on our view of 2024.
Janardan Menon: Understood. And just a small follow-up on China. As you referred to, the official regulations coming out of the US government yesterday, if you look at the chuck overlay numbers of 2.4 nanometer, it seems to capture the 1980 as well. And what you are saying is that because it's -- only the advanced manufacturing facilities will be covered by that and that's a handful, but do you think that that could be a moving target through the course of the year? I mean, could you -- could new fabs continuously be added to that or taken away from that? So does that sort of cloud the overall visibility on where China could actually end up just from a geopolitical standpoint over the next 12 months?
Peter Wennink: Well, I think that last where the geopolitical confrontation would end up is a billion dollar question, I suppose, but no -- I think basically two answers. One, what -- how the regulations are currently structured is like -- the Japanese have also done the same thing. They basically say all immersion, but export controls will only apply to advanced manufacturing, which is only those five fabs. Now, could that grow? Yes, but that has always been there. That particular risk in terms of export controls being enlarged to what it is today, that's a risk that we've always had. Yeah. So that is basically a function of what you ended your question with, is how the geopolitical escalation will happen going forward. We don't know. I mean, we just have to live with what the regulation is today, and you need to realize that this regulation, which is an amalgamation, a consolidation of the October 7 proposal of last year with the trilateral agreement between the Dutch, the Japanese and the Americans, has led to this situation of this handful of fabs. So it's -- so this is also the result of, you could say, in-depth discussions, multilateral discussions between governments. Now, I don't say that that's never going to change, but that's what you need to consider also. So we are where we are. I don't have a crystal ball to predict where geopolitics will go and how it will escalate, but we need to work from where we are. And I can assure you that the results that currently on the table in terms of regulation are the result of very deep discussions between governments. That are not just on a lazy Sunday afternoon being prepared. This is very deep. So, yes, it can change, but then also, I think the geopolitical situation first needs to change. And then, of course, like I said, I don't have a crystal ball.
Roger Dassen: And Janardan, a final element in the conversation, building on what Peter was just saying, and he said it before. Obviously, the regulation really aims at advanced semiconductor manufacturing. And I think you'd simply have to recognize that most of the Chinese customers have gotten the message already last year, and as a result of that, have really shifted to what we call mid-critical and mature manufacturing. That's what you see them do. So as a result of that, I would say the number of fabs that are still involved, number of our customers and fabs that are still involved in advanced manufacturing have gone down dramatically. And as a result of that, we can now talk about a handful of fabs that are associated with that. So --
Peter Wennink: Yeah.
Roger Dassen: If that's the objective, then that is completely in line with --
Peter Wennink: Has been achieved.
Roger Dassen: Exactly what now has been achieved.
Peter Wennink: That's a good point, Roger. When we do the roadmap discussions with our Chinese customers, they all moved back, not forward. They all moved back. And they do that because what I -- it was an answer to a previous question because if you look at the demand for mid-critical, low mid-critical and mature semiconductors and you look at the significant transitions that also China is going through and where in many areas they're leading, whether it's electrical vehicles, or whether it's the energy transition, the square inches of silicon that is needed to support that are massive. So they actually need to build that capacity, which, by the way, they're not going to be self-sufficient because the demand, the local demand is simply too high, I mean, but they will be more self-sufficient, but not fully. Yeah. And so there's no downside for our Chinese customers to actually move their roadmap in that direction.
Janardan Menon: Understood. Thank you so much.
Skip Miller: All right. Thank you all. We are now at the end of the hour. So if you are unable to get through on this call and still have questions, please feel free to contact ASML Investor Relations department with your questions. Now, on behalf of ASML, I'd like to thank you all for joining us today. Operator, if you could formally conclude the call, I'd appreciate it. Thank you.
Operator: Thank you. This concludes the ASML 2023 Third Quarter Financial Results Conference Call. Thank you for participating. You may now disconnect.
Related Analysis
ASML Plunges 7% on Q1 Revenue Miss
ASML Holdings (NASDAQ:ASML) experienced a 7% intra-day drop in its shares following the announcement of first-quarter sales for fiscal 2024 that did not meet expectations. The company reported net sales of 5.29 billion euros, which fell short of the expected 5.39 billion euros. However, its net profit reached 1.22 billion euros, surpassing the forecasted 1.07 billion euros.
Year-over-year comparisons show a 21.6% decrease in net sales and a significant 37.4% reduction in net income. A notable concern was the net bookings for ASML’s equipment, a critical indicator of future revenues, which totaled 3.61 billion euros. This figure represents a 4% decrease from the previous year and a significant decline from the prior quarter, falling well below the expected 4.63 billion euros.
Despite these challenges, ASML maintained its annual sales forecast at 27.6 billion euros, the same as the previous year, and anticipates stronger performance in the second half of 2024, aligning with the broader industry recovery from the downturn. CEO Peter Wennink described 2024 as a transitional year, emphasizing ongoing investments in capacity ramp-up and technology to prepare for an anticipated market upturn.
ASML also highlighted the necessity to secure around 4 billion euros in orders each subsequent quarter to achieve its 35 billion euros revenue goal for the year, indicating the company’s strategic focus on meeting these targets amidst current challenges.
ASML Stock Falls After Q3 Miss
Following weaker guidance, ASML Holding (NASDAQ:ASML) saw a more than 2% drop in its stock price in pre-market after reporting lower-than-expected orders, leading to a cautious sales forecast for the next year.
This caution arises from clients conserving cash due to economic uncertainties. While the company acknowledges that the semiconductor industry may have reached a trough, the uncertainty surrounding the shape of the demand recovery is causing customers to be cautious. Chief Financial Officer Roger Dassen noted that customers are exercising prudence with cash and capital expenditures, which is reflected in their order placements.
The company's net profit for the three months ending on September 30 was 1.9 billion euros, in line with analysts' expectations. However, net bookings were significantly lower at 2.6 billion euros compared to the third-quarter sales of 6.7 billion euros. Revenues came in at 6.67 billion euros, missing the Street estimate of 7.31 billion euros.
Despite the cautious outlook for 2024, ASML maintains a robust order backlog of 35 billion euros, and the company expects a more favorable 2025, given its customers' expansion plans across Asia, the United States, and Europe.
Analysts Warn of Shipment Cuts at ASML Holdings
ASML Holdings (NASDAQ:ASML) shares fell more than 1% pre-market today due to concerns raised by TF International Securities' analysts, who believe that the company will likely make significant reductions in its EUV equipment shipment forecasts for 2024, possibly by 20-30%.
The analysts’ warning is based on several factors, including lower expected demand for Apple's 3nm chips in 2024, reduced demand for Qualcomm's 3nm chips due to Huawei's chip sourcing halt, lower-than-expected demand for Samsung's and Intel's chips, and delays in memory expansion plans by Samsung, Micron, and SK Hynix, now expected to happen between 2025 and 2027.
Analysts Warn of Shipment Cuts at ASML Holdings
ASML Holdings (NASDAQ:ASML) shares fell more than 1% pre-market today due to concerns raised by TF International Securities' analysts, who believe that the company will likely make significant reductions in its EUV equipment shipment forecasts for 2024, possibly by 20-30%.
The analysts’ warning is based on several factors, including lower expected demand for Apple's 3nm chips in 2024, reduced demand for Qualcomm's 3nm chips due to Huawei's chip sourcing halt, lower-than-expected demand for Samsung's and Intel's chips, and delays in memory expansion plans by Samsung, Micron, and SK Hynix, now expected to happen between 2025 and 2027.