Autodesk, Inc. (ADSK) on Q2 2024 Results - Earnings Call Transcript

Operator: Thank you for standing by, and welcome to Autodesk's Second Quarter 2024 Earnings Call. [Operator Instruction] I would now like to hand the call over to Simon Mays-Smith, Vice President, Investor Relations. Please go ahead. Simon Mays-Smith: Thanks, operator, and good afternoon. Thank you for joining our conference call to discuss the second quarter results of Autodesk's fiscal '24. On the line with me are Andrew Anagnost, our CEO; and Debbie Clifford, our CFO. Today's conference call is being broadcast live via webcast. In addition, a replay of the call will be available at autodesk.com/investor. You can find the earnings press release, slide presentation and transcript of today's opening commentary on our Investor Relations website following this call. During this call, we may make forward-looking statements about our outlook, future results and related assumptions, products and product capabilities, business models and strategies. These statements reflect our best judgment based on currently known factors. Actual events or results could differ materially. Please refer to our SEC filings, including our most recent Form 10-Q and the Form 8-K filed with today's press release for important risks and other factors that may cause our actual results to differ from those in our forward-looking statements. Forward-looking statements made during the call are being made as of today. If this call is replayed or reviewed after today, the information presented during the call may not contain current or accurate information. Autodesk disclaims any obligation to update or revise any forward-looking statements. During the call, we will quote several numeric or growth changes as we discuss our financial performance. Unless otherwise noted, each such reference represents a year-on-year comparison. All non-GAAP numbers referenced in today's call are reconciled in our press release, or Excel financials and other supplemental materials available on our Investor Relations website. And now I will turn the call over to Andrew. Andrew Anagnost: Thank you, Simon, and welcome, everyone, to the call. Resilience, discipline and opportunity again underpinned Autodesk's strong financial and competitive performance despite continued macroeconomic policy and geopolitical headwinds. Resilience provided by our subscription business model and our product and customer diversification discipline and focus in executing our strategy and deploying capital through the economic cycle and opportunity from developing next-generation technology and services which deliver end-to-end digital transformation of our Design and Make customers and enable a better world designed and built for all. Our leading indicators remained consistent with last quarter with growing usage and record bid activity on BuildingConnected and cautious optimism from channel partners. Customers remain committed to transformation and to Autodesk leveraging automation more where they are seeing headwinds from the economy, labor shortages and supply chains. That commitment was reflected in our Q2 performance, growing adoption and token consumption within Enterprise Business Agreement and strong renewal rates. Autodesk remains relentlessly curious with a propensity and desire to evolve and innovate. We were delighted that Autodesk was recently highlighted as a Best Workplace for Innovators by Fast Company. I will now turn the call over to Debbie to take you through our quarterly financial performance and guidance for the year. I'll then come back to provide an update on our strategic growth initiatives. Debbie Clifford: Thanks, Andrew. Overall market conditions and the underlying momentum of the business remained similar to the last few quarters. Despite a tough macroeconomic backdrop that continues to drag on the overall rate of new subscriber acquisition and the forward momentum of the business and may continue to do so. Our financial performance in the second quarter was strong. We said last quarter that we had a strong cohort of EBAs renewing in the second half of the year that last renewed three years ago at the start of the pandemic and that subsequent adoption and usage has been strong. Some of that strength came through in the second quarter, which was earlier than we were expecting and which boosted billings, free cash flow and subscription revenue. Total revenue grew 9% and 12% in constant currency. By products in constant currency, AutoCAD and AutoCAD LT revenue grew 9%, AEC revenue grew 14%, Manufacturing revenue grew 9% and in double digits, excluding a headwind from variances in upfront revenue, and M&E revenue grew 10%. By region in constant currency, revenue grew 15% in the Americas, 11% in EMEA and 6% in APAC. Direct revenue increased 18% and represented 37% of total revenue, up 3 percentage points from last year, benefiting from strong growth in both EBAs and the eStore. Net revenue retention rate remained within the 100% to 110% range at constant exchange rates. The transition from upfront to annual billings for multiyear contracts is proceeding broadly as expected. We had a full quarter impact in the second quarter, which resulted in billings declining 8%. Total deferred revenue increased 14% to $4.2 billion. Total RPO of $5.2 billion and current RPO of $3.5 billion grew 11% and 12%, respectively. Turning to the P&L. Non-GAAP gross margin remained broadly level at 92%. GAAP and non-GAAP operating margin remained broadly level with revenue growth and cost discipline, offsetting the impact of exchange rate movements. Free cash flow was $128 million in the second quarter, which was a bit better than we've been expecting, primarily due to the timing of EBAs, but also due to some favorable in-quarter linearity. Turning to capital allocation. We continue to actively manage capital within our framework. Our strategy is underpinned by disciplined and focused capital deployment through the economic cycle. We are being vigilant during this period of macroeconomic uncertainty. During Q2, we purchased approximately 400,000 shares for $87 million at an average price of approximately $200 per share. We will continue to offset dilution from our stock-based compensation program and to opportunistically accelerate repurchases when it makes sense to do so. Now let me finish with guidance. The headline is that overall, the underlying momentum in the business remains consistent with the expectations embedded in our guidance range for the full year. Our sustained momentum in the second quarter and early expansion of some EBAs expected to renew later in the year, reduce the likelihood of our more cautious forecast scenarios given that, we're raising the lower end of our guidance ranges. Let me summarize some key factors we highlighted earlier in the year. First, we have a strong cohort of EBAs renewing in the second half of the year, although, as I mentioned earlier, some of that benefit was billed in the second quarter. Second, foreign exchange movements will be a headwind to revenue growth and margins in fiscal '24. The revenue headwind will moderate a bit in the second half of the year. Third, Switching from upfront to annual billings for most multiyear customers creates a significant headwind to free cash flow in fiscal '24 and a smaller headwind in fiscal '25. Our expectations for the billings transition are unchanged. Fourth, as we thought might happen, we saw some evidence of multiyear customers switching to annual contracts during the second quarter. It wasn't big enough to be called a trend, but we're keeping an eye on it. It's still early days, and we'll keep you updated as the year progresses. All else equal, if customers switch to annual contracts, it would proportionately reduce the unbilled portion of our total remaining performance obligations and negatively impact total RPO growth rates. Deferred revenue, billings, current remaining performance obligations, revenue, margins and free cash flow would remain broadly unchanged. Annual renewals create more opportunities for us to drive adoption and upsell and are without the price lock embedded in multiyear contracts. And fifth, we expect our cash tax rate will return to a more normalized level of approximately 31% of GAAP profit before tax in fiscal '24, up from 25% in fiscal '23. We the federal tax payment extension after the winter storms in California means cash tax payments shift from the first half of the year to the third quarter, reducing third quarter free cash flow. Second half free cash flow generation will, therefore, be significantly weighted to the fourth quarter. We still anticipate fiscal '24 will be the cash flow trough during our transition from upfront to annual billings for multiyear contracts. Putting that all together, we now expect fiscal '24 revenue to be between $5.41 billion and $5.46 billion. We expect non-GAAP operating margins to be similar to fiscal '23 levels with constant currency margin improvement, offset by FX headwinds. We expect free cash flow to be between $1.17 billion and $1.25 billion. We're increasing the guidance range for non-GAAP earnings per share to be between $7.30 and $7.49 to reflect higher interest income on our cash balances in addition to the reduced likelihood of our more cautious forecast scenarios. The slide deck on our website has more details on modeling assumptions for Q3 and full year fiscal '24. We continue to manage our business using a rule of 40 framework with a goal of reaching 45% or more over time. We think this balance between compounding growth and strong free cash flow margins captured in the rule of 40 framework is the hallmark of the most valuable companies in the world, and we intend to remain one of them. As we said back in February, the path to 45% will not be linear, given the macroeconomic drag on revenue growth from the rate of new subscriptions growth and the drag to free cash flow as we transition away from multiyear contracts paid upfront. But let me be clear, we're managing the business to this metric and feel it strikes the right balance between driving top line growth and delivering disciplined profit and cash flow growth. We intend to make meaningful steps over time toward achieving our 45% or more goal regardless of the macroeconomic backdrop. Andrew, back to you. Andrew Anagnost: Thank you, Debbie. Let me finish by updating you on our progress in the second quarter. Our strategy is to transform the industries we serve with end-to-end cloud-based solutions that drive efficiency and sustainability for our customers. We continue to see good growth in AEC, fueled by customers consolidating on our solutions to connect and optimize previously siloed workflows through the cloud. And as we talked about in February, digital momentum is also building among asset owners in infrastructure and other areas. This momentum is expected to accelerate with infrastructure investment programs like the U.S. Advanced Digital Construction Management System program, which launched during our second quarter. Cannon Design is a global design practice encompassing strategy, experience, architecture, engineering and social impact. It is driving forward its digital transformation and embracing the cloud to increase operational efficiency, enhance security, establish a single point of truth and enable more seamless end-to-end collaboration. During the quarter, it expanded its investment with Autodesk by leveraging Autodesk Docs as a common data environment adopting Forma and is exploring opportunities to integrate Autodesk's XR and asset management capabilities to its design portfolio. Outside the U.S. our construction platform is benefiting from our strong international presence and established channel partner network. During the quarter, a property developer and transit network operator based in Asia needed to simplify operations across its many infrastructure projects with a wide range of contractors and subcontractors. To manage this complexity, it needed a single source of truth for its project data and way to streamline workflows on a single platform. In Q2, it leveraged support from our local channel partner and standardize on one platform by adding Autodesk Construction Cloud to its existing portfolio of Autodesk AEC design tools to gain visibility into contractors and subcontractors workflow and the potential to unlock breakthrough productivity gains. Shook Construction, an ENR 400 general contractor based in Ohio made the decision to standardized on Autodesk Construction Cloud to better streamline their operational workflows. After evaluating many competitive options, Shook Construction chose Autodesk Construction Cloud as the best fit for driving consistent workflows, creating high-impact collaboration with their construction partners and eliminating cumbersome manual workflows. We continue to benefit from our complete end-to-end solutions, which encompass design, preconstruction and field execution through handover and into operations. Again, these stories have a common theme: managing people, process and data across the lifecycle to increase efficiency and sustainability while decreasing risk. Over time, we expect the majority of all projects to be managed this way, and we remain focused on enabling that transition through digital transformation. We talked last quarter about the short-term disruption from integrating our construction and worldwide sales teams. I'm pleased to report that things began to settle in the second quarter. We believe that combining the two teams will allow us to expand the scale and reach of our construction business, particularly in our design customer base and our ability to serve our customers across the complete project life cycle. Encouragingly, Autodesk Construction Cloud MAUs were up over 100% in the quarter. Moving on to manufacturing. We made excellent progress on our strategic initiatives. Customers continue to invest in their digital transformations and consolidate on our Design and Make platform to grow their business and make it more resilient. For example, a multinational manufacturer which serves the construction industry on both a building product manufacturer and through tools and construction processes has been leveraging the Autodesk portfolio to connect workflows across the AEC and manufacturing industries. It's expanded its commitment to BIM using Revit, Navisworks and Construction Cloud, which has enabled the customer to adopt a collaborative and data-driven approach across design, construction and maintenance services. which minimizes clashes and rework and culminates in more efficient and successful building projects. In the second quarter, the customer grew its EBA with Autodesk ahead of its Q4 renewal date to accelerate the adoption of BIM and facilitate the design of its products and materials directly within MEP models. Fusion continues to provide an easy on rate into our cloud ecosystem for existing and new customers. In Europe, an appliance manufacturer who was already an existing user of our manufacturing collection and AutoCAD mechanical, purchased additional seats of Fusion for PCB design. It's heating systems division will leverage Fusion's electronic design automation capabilities to quickly and seamlessly connect more of its design to manufacturing workflow to drive greater efficiency. Fusion continues to grow strongly, ending the quarter with 236,000 subscribers as more customers connect more workflows in the cloud to drive efficiency, sustainability and resilience. At Investor Day, I talked about leveraging our key growth enablers, including business model evolution, customer experience evolution and convergence between industries to provide more and better choices for our customers. Our Flex consumption model is a good example of this. Flex's consumption pricing means existing and new customers can try new products with less friction and enables Autodesk to better serve infrequent users. Not surprisingly, the lion's share of the business has come from new or existing customers expanding their relationship with Autodesk. During the quarter, we signed 3 more million dollar Flex deals. As Steve said at our Investor Day, we've also introduced a new transaction model for Flex, which will give Autodesk a more direct relationship with our customers and more closely integrate with our channel partners over time. We will begin testing our new transaction model more broadly in Australia later this year. And finally, we continue to work with noncompliant users to ensure that they are using the latest and most secure versions of our software. For example, after identifying and alerting a Chinese-based automobile designer about noncompliant usage and despite working to ongoing challenges from the pandemic, the customer eventually committed to three year VRED and Alias subscriptions. As expected, our initiatives to tighten concurrent usage of named user subscription and expand the precision and reach of our in-product messaging drove incremental growth during the quarter. Now let me finish with the story. According to the National Oceanic Service, Coral reefs are some of the most diverse and valuable ecosystems on earth. While they take up less than 1% of the ocean floor, their extraordinary biodiversity supports about 25% of all marine life. Healthy coral reefs support fisheries as well as jobs and businesses through tourism and recreation. It also buffer shorelines against 97% of the energy from waves, storms and floods, helping to prevent loss of life, property damage and erosion. It can take 10,000 to tens of millions of years for our coral reefs to form, and just weeks for it to die. Rising ocean temperatures can cause coral to bleach and die. Half of living coral reefs have died since the 1950s. Without intervention, we're on track to lose 70% to 90% of the remainder by 2050. That is, unless we find a faster way to bring coral reefs back from the brink. With support from Autodesk and the Autodesk Foundation, a company called Coral Maker is using our digital tools, artificial intelligence, and robotics to deliver core restoration at scale with cloud collaboration to keep the global team connected across oceans and time zones. As Dr. Karen Foster, coral makers founder says, the partnership with Autodesk has empowered us to develop new technology to restore reef at a rate unimaginable a few years ago. Current restoration projects can deploy about hectare of portal per year. With coral makers technology, it's possible to deploy 100 sectors per year. From the oceans to the earth and Sky augmented design, powered by Autodesk will enable our customers to go further and faster to design and make a better world for all. We've been laying the foundation to build enterprise level AI for years with connected data, teams and workflows in industry cloud. real time and immersive experiences, shared extensible and trusted platform services, innovative business models and trusted partnerships. Autodesk remains relentlessly curious with a propensity and desire to evolve and innovate. We are building the future with focus, purpose and optimism. Operator, we would now like to open the call up for questions. Operator: [Operator Instructions] Our first question comes from the line of Saket Kalia of Barclays. Please go ahead, Saket. Saket Kalia: Okay. Great. Hi Andrew. Hi, Debbie. How are you guys doing? Thanks for taking my questions here. Debbie Clifford: We're doing great. How are you Saket? Saket Kalia: Doing great, doing great. Debbie, maybe for you, just a quick housekeeping question here. Great to see the revised range on a lot of metrics, particularly revenue. And so, when I think about the midpoint of the revenue guide going up by about $25 million, first of all, great to see the impact of FX to start to lighten. But could you just maybe walk us through a broad brush how much of this year's raise on revenue is from FX versus maybe some underlying fundamentals in the business? Debbie Clifford: Yes. So, we had a small increase in the midpoint of the guide. The dollar change was immaterial it's tough really to come up with a mix of assumptions that get us to the low end of our previous guidance range. So, the midpoint increase reflects a mix of both organic and FX assumptions. Overall, the business is tracking generally in line with our expectations. Saket Kalia: Okay. Got it. Got it. Andrew, maybe for you, of an open-ended question. But I guess now as you've completed the first quarter of this transition to a new billing model. Is there anything that's surprising you about maybe how customers or how partners are behaving, again, open ended? Andrew Anagnost: Yes. No real big surprises. Saket I mean - Debbie flagged last quarter that we might see some customers reverting back to annual contracts as a result of the change. We did see that. Nothing really out of bound zone, nothing really surprising. Debbie, do you want to add anything to the details or... Debbie Clifford: Yes. I would say the initial rollout of the new billings model is going well. The systems are working, customer and partner behavior is pretty much as we expected. As Andrew mentioned, we are seeing a small proportion of our customers choose annual contracts versus multiyear contracts billed annually, but generally, we expected a bit of that, and the performance has been in line with our expectations. And remember, if customers choose annual contracts, it doesn't impact the P&L. It only impacts unbilled and total RPO. It's still early days. We're monitoring it closely. And I think it just continues to be a good example of how we're working to optimize the business. It's about reducing the volatility of our cash flow while simultaneously giving our customers, the purchasing pattern that they want. And then finally, I'd say that there's no change in how we expect the transition to impact our cash flow outlook. Saket Kalia: Got it. All very clear. Thanks guys. Operator: Thank you. Please stand by for our next question which comes from the line of Jay Vleeschhouwer of Griffin Securities. Jay Vleeschhouwer: Got it. Thank you. Good evening. Andrew, for you first, you made some constructive comments about what you're seeing in the AEC business. But more broadly, and as you're well aware, there's quite a bit of ferment going on in that market right now in terms of references to what's come to be called BIM 2.0 as you know, just a couple of months ago at an AUC conference, a customer group launched a new customer-developed design specification for software. You yourselves are working on a dual track of enhancing revenue, but focusing on format. So lots going on in terms of various currents in that industry or part of the industry. Help us understand how you're thinking about managing for all those different dynamics that are going on in the AEC industry. And then a follow-up. Andrew Anagnost: Yes. So Jay thanks. Jay, there's three threats to this, right? One is kind of the core platform threat around data and data flow. At the root of all of this, we need to make sure as much of the data that we have locked inside Revit files and lots of other types of files that our customers have gets turned into APIs wherever possible, right? This is a lubricant to the workflows that people are worried about. And I think a part of really what underpins the whole concept of BIM 2.0. That's one of the things. The second piece is you've got to make sure that their ability to do detailed in-depth complicated, sophisticated BIM models gets more performant, more productive and faster. That's core to kind of building up, and improving Revit in some significant ways, which we're absolutely looking at. But the third point, which I think is more important is you really need to reimagine how BIM is being done. The paradigm needs to shift, and it needs to shift to the world of not only being cloud-enabled but also being what we really like to call augmented design-enabled or outcome-based in whatever language we use, so that you can actually change the way people do BIM. And that's one of the big things that we're focusing on with Forma. And that's very different than - we have certain types of competitors. It's in line with what the spec is from the customers. But when you talk about data revenue improvements, and the move to what we call augmented design or outcome-based design. Those are the big thrust in terms of what we're trying to do to bring the industry to a better way of doing BIM? Jay Vleeschhouwer: Okay. Second question refers to the comments you made about a new transactional model and a pilot you're going to be undertaking in Australia. So maybe you could elaborate on that. When I hear that, it sounds to me like there's potentially going to be some further change to channel economics. You've just completed the move to back-end-only margins. Are you thinking about perhaps taking the flex commission model more broadly across the rest of the business? Or what exactly you're looking to accomplish with that? Andrew Anagnost: So let's talk about the Flex experiment and the things you were doing with - I think with Flex last. First off, Flex because it's like a consumption-based model, and it involves usage of various different products - it really - it's really incredibly helpful for the customer for us to be able to have a much more direct relationship with the customer with regards to that offering. Because that way we're able to offer a lot more visibility to how they're using the offering, what they're using, when they're using it, how much they're consuming, and actually help them get the most out of the offer. So, what we've done over the last year is we've proved out a new transaction model working with our partners, and rolling out across various regions that is supporting Flex, and that is a much more direct transaction model. Through that process, we've learned a lot. We've gained a lot of knowledge. We've addressed a lot of issues both systems-wise and process-wise. And we are now in a position with Flex to start growing, and expanding that model at greater and greater volume. And that's exactly what's happening with Flex. The volume of Flex is increasing, increasing, and we're doing it reliably, repeatedly and in a pretty positive way. Where we go from here depends solely on how we watch these things evolve and what the benefits of this transaction model for us. And all options are open to us in the future, but that's where we are right now. We've perfected what we've done on the Flex. Jay Vleeschhouwer: Okay. Thank you. Operator: Thank you. Our next question comes from the line of Adam Borg of Stifel. Adam Borg: Awesome. And thanks so much for taking the questions. Maybe just for Andrew on the infrastructure opportunity. I know you've been calling out increasing traction with State Department of Transportation, and you even referenced some grants in the quarter in the script. So maybe just talk a little bit more about how you think about the infrastructure opportunity overall? And really what separates all of that from competitors in going after it? Andrew Anagnost: Yes. So look, at a high level, one of the things I'm really excited about the thing with a really long name. The advanced digital construction management system program that the U.S. government rolled out, that is the program related to the money that's designed to help department of transportation look at their infrastructure, look at their processes, and start modernizing their digital processes around design and construction of infrastructure. That's an important step in getting a lot of these Department of Transportations to really start thinking about how they get ready to spend more money on infrastructure, and do it better and address the serious capacity challenges we have around materials, manpower, and dollars with regards to what we have to do. So pretty excited about, that because that's an open door to having new conversations with these departments about how they do things. Our focus has not changed. We are very much focused on water and road and rail, and we continue to innovate and drive improvements in those areas. I think our biggest differentiator is what we bring to market as a modern architecture. We bring to market more cloud-based solutions, more owner-based solutions for managing the infrastructure once you have it, and really just more technology that sits together in different ways. So, we're looking forward to having that discussion with the Department of Transportation over the next months and coming years. And I think you're going to start to see real change in some of those organizations. Adam Borg: That's really helpful. And maybe just as my follow-up, just on the earlier-than-expected EBA renewal pool in the quarter. So maybe just talk about - just given the softer macro obviously, that our checks have been suggesting, and you talked about no real change sequentially. But just what's leading to customers to choose to renew early and - maybe just as a quick follow-up to that, as we think about the guidance for the year, any way to quantify the type of expansion opportunity embedded from the EBA? Thanks so much. Debbie Clifford: I think, Adam, you were coming - in and out a little bit, but I think I got the bulk of what you were saying. So just stop me if I'm missing something. But in terms of the EBA behavior. Really, what we saw was driven by them. Our customers were managing their own budgets and cash flow. And so, their desire to get early billings for frankly, higher usage of their tokens was driven by their own - behavior, which we see as a real positive sign for us in engaging with those enterprise customers. They're seeing strong usage of our portfolio, and they're continuing to invest in their relationship with us. And those billings boosted our total billings, revenue, and free cash flow during the quarter. So overall, I think it's a win-win. There was a second part, I think, to your question. Adam Borg: Yes. Just curious. And so thanks. I was just curious, any way to quantify kind of the type of expansion opportunity from the EBA renewal pool in the back half of the year as you think about full year guidance? Debbie Clifford: Not something we can quantify for you, Adam, but I would just reiterate the fact that we do see it as a real positive that for the first two quarters of the year-to-date that we're seeing strong usage, and that's already leading to early billings. So a positive from our standpoint overall. Adam Borg: Awesome. Thanks so much. Operator: Thank you. Our next question comes from the line of Joe Vruwink of Baird. Joe Vruwink: Great. Hi, everyone. Maybe I wanted to revisit your AEC exposure. I know you've discussed this in the past and just as there's offsets, so commercial market see pressure, institutional or infrastructure far better. So you have diversification there. I guess when you think about the current business composition, and how the different subsectors are faring, do you think the nature of Autodesk and AEC is any better or worse than would have been the case in past cycles? And I'm asking less about Autodesk just as a subscription model now versus a license model in the past. And more about Autodesk and things like Revit adoption or reliance on the cloud which might create a different dynamic for the business this down cycle versus past down cycles. Andrew Anagnost: I think one of the things that you said, and I want to reinforce it, is that - we are diversified across all sectors of making things. Everything that gets made, we're involved in. It's not just AUC, it's buildings, it's bridges, it's car, it's electronics. And of course, it's film and game. So just remember, we're diversified across all of those segments. What's different now, and I think it's important to recognize this. Is that the AEC industry as a whole is chasing productivity and digitization gains, the entire industry, from construction, all the way through to any design in every part of the process in between, engineering and all the things associated with that. So that fundamental change is creating long-term pull for what we're doing. And what we're doing is we're connecting the design, and make processes across that industry together in the cloud in unique and highly integrated way. So that people can do things faster, more sustainably and with greater - with lower risk and better outcomes. That fundamental shift is very different than what we've seen before. And that's going to - we're going to be riding that fundamental shift for quite a few years. Joe Vruwink: Okay. Great. Andrew, that's helpful. And then second question, wondering if you can comment on how you see the writers and actors, strike potentially impacting business in media and entertainment, particularly if this goes on for a while and your customers are finishing what's in post-production with, I suppose, a lack of new things coming in, what that might mean towards the end of the year? Andrew Anagnost: Yes. So you've hit one thing right there, right? People are still in post-production right now for the existing book that post production overhang will continue for a little while. If the strike continues for months on end, we will likely see an increased impact on our media and entertainment business. It's still growing now. It definitely slowed down in Q2, but it's still growing. So as we look forward, your guess is as good as mine about how long this strike will go on. But I do remind you our exposure to media entertainment is relatively small compared to the other parts of our business. But there's no doubt that an extended strike could have an impact on that business. Joe Vruwink: Okay. Thank you very much. Operator: Thank you. Our next question comes from the line of Tyler Radke of Citi. Tyler Radke: Yes. Thanks for taking the question. So I wanted to just go back to the commentary on kind of the puts and takes in the quarter. So you talked about seeing some early expansions on some of the multiyear EBAs. And I just wanted to clarify, was that also stronger expansion? Or was it more of a timing factor? And then Debbie, this might be a bit of a nitpicky question. But just as I look at the constant currency revenue guidance, I think the high end of the guide says 12% plus versus 13% last quarter. I just wasn't sure if there was a change there. If you could just kind of comment on the puts and takes on that, too? Thank you. Debbie Clifford: Sure. Thanks, Tyler. So the EBA usage was strong, and we've been tracking it for the year-to-date. It wasn't necessarily stronger than our expectations, however. So to clarify, it's really more than anything it's a timing difference. We were expecting that the revenue would hit in Q4 and it hit in Q2. But the fact that our customers are using more than they had anticipated the onset of the contracts is a good thing. It's just that we've been tracking it. We've known about it for the year-to-date, and we just saw the invoices in Q2 versus Q4. In terms of the constant currency guide, the range, it was impacted really by rounding. The dollar change was immaterial. And overall, the business is tracking generally in line with our expectations. Tyler Radke: Okay. Great. And follow-up for Andrew. You talked about some encouraging signs on the Autodesk construction side, given the reorg, you talked about it kind of settling in. How - maybe just remind us kind of what were the big changes? What are you hoping to accomplish? And should we start to see the make revenue begin to accelerate throughout the rest of the year? Thank you. Andrew Anagnost: Yes, Tyler. Happy to clarify that. So look, what we did in Q1 is we merged the Autodesk Construction Solutions sales force with the mainline sales force. This was with the objective of long-term accelerating business growth in that area, particularly in our design-centric accounts. So we wanted to keep the contractor and subcontractor power of the ACS team and combine it with the teams that are focused on some of our design accounts as well. We expected some bumps in doing that because you have to realign account assignments, you have to realign players and who's in charge of what. We've seen a lot of those bumps get smoothed out into Q2. So we're seeing a return to expected patents. We've lost no business during the process. As I told you - as I told you earlier in the opening commentary, when we talked about - when I talked about things like Shook, the general contractor in Ohio. We're winning - we're continuing to win these contractors. Primarily, one of the things we hear a lot is the pricing predictability associated with our offering and the ability to show them a path not only to a stable pricing model, which customers really like and increasingly see a viable and strong alternative to project management and what ACS offers, but also in terms of the integration between design and banking. I expect the consolidation of the sales force is to continue to further accelerate the construction business moving forward as we continue to work this through. So progress in the right direction, and we can expect to see more progress. Tyler Radke: Great to hear. Thank you. Operator: Thank you. Our next question comes from the line of Jason Celino of KeyBanc Capital Markets. Jason Celino: Great. Thanks for taking my question. This is a spin on Saket's very first question, but it relates to the quarter and not necessarily the guide. But when we look at the outperformance in the quarter, it's the biggest beat on a percentage and an absolute basis we've seen in many quarters. Can you just help us unpack maybe what the magnitude of the EBA strength was or the FX kind of benefits, if there were any? Debbie Clifford: The biggest driver of the beat came from the EBAs. Jason Celino: Okay. Perfect. And then, Andrew, curious on updates on Innovyze. At the beginning of the year, I think there was this view that funding for sewer projects and water projects hadn't quite started to flow, no pun unintended yet, but that maybe we would see things start to open up in the second half or next year. Is that still the case? I guess what are you seeing? Andrew Anagnost: Yes. I mean, look, look at the news, right, all you get is increasing evidence that most regions and municipalities need to reevaluate their water management, both at a sewage level and a treatment level infrastructure. So that has fundamentally not changed. And we haven't yet seen the increase in project actually starting projects in that area. But what we are seeing is people buying ahead of demand. So we actually saw a lot of strength with Innovyze in our EBAs in our large accounts, which is an important precursor to some of the larger efforts that might go on moving forward. But no floodgates have opened up yet, no pun intended from my side. But we still see the exact same pattern we've talked about. Jason Celino: Okay. Great. Appreciate it. and I like the puns. Operator: Thank you. Our next question comes from the line of Michael Funk of Bank of America. Michael Funk: Yes. Thank you all for the questions tonight. A couple if I could. So on the EBA renewal comments that you made earlier, can you give us a sense of the like-for-like change there, whether or not customers on balance or upsizing, increasing the duration of the contract, what that looked like. Debbie Clifford: So to clarify, these contracts, they were not contracts that were renewed. We're expecting that these contracts will be renewed in Q4 per our normal cycles. What happened is that these customers have been using ahead of the usage that was built into their original contracts. And so what we saw in Q2 was billings for the overuse versus the original contracts. But we still expect the renewals will occur in Q4. Michael Funk: Understood. I must have miss heard you earlier. So for the overview then, do you expect that trend to continue for the remainder of the year? And what do you think is driving that over use? Debbie Clifford: We're certainly hopeful that, that trend continues. We see it as a very positive sign that our customers are asking for early billings because they're using our products more than they anticipated, and they're using the broad breadth of the portfolio. The other thing I would say is that the usage that was built into these contracts when they were originally signed. Remember, this was three years ago, at the onset of the pandemic. And so the usage in those contracts might have been a bit lower just given the environment in which those contracts were renewed. And so as we start to come out of the pandemic, we're seeing more and more usage. We've talked about usage being broadly speaking for Autodesk, but also for our EBAs being a good leading indicator, and that usage continues to increase. I don't have a crystal ball, Michael. I wish I did. I could tell you for sure that the usage would continue to go up in the back half of the year, but we're certainly hopeful and all signs are leading in that direction. Michael Funk: Okay. So, in terms of trends so far this quarter to date are consistent with 2Q? Debbie Clifford: Sorry, I didn't hear. Michael Funk: Your last comment about trends continuing is the interpretation there that the trend has continued in - from 2Q into this quarter of increased usage. Debbie Clifford: We're not commenting on Q3 at this point. Overall, the performance that we saw from our EBAs in Q2 is really strong, and we're hopeful that it will continue. Michael Funk: Great. Thank you, Debbie. Operator: Thank you. Our next question comes from the line of Matt Hedberg of RBC Capital Markets. Matt Hedberg: Great. Thanks for taking my questions. Congrats on the stability here. Really, really good to see. Maybe, Debbie, for you, maybe I missed it, but cash flow was - free cash flow was significantly better than we thought this quarter. I know you don't guide quarterly. So maybe just - again, maybe I missed it, but a little bit more on sort of why free cash flow is so strong this quarter? And as we think about Q3, Q4 kind of the linearity there, you took the low end of the full year up a little bit. How should we kind of think about that split sort of between 3Q and 4Q? Debbie Clifford: Yes. So Q2 was strong, primarily because of the timing of the EBA billings that I've been talking about as well as some favorable in-quarter linearity. So the linearity that we saw was better than we had expected. And then when we look at the back half of the year, second half free cash flow will be significantly weighted to the fourth quarter. I've called out the federal tax payment extension that positively impacted the first half free cash flow, and it will negatively impact Q3. Overall, we still anticipate that fiscal '24 is going to be the free cash flow trough during this transition from upfront annual billings. Matt Hedberg: Great. Thanks. And then, Andrew, for you, following up on earlier questions kind of on the split of your business, obviously, an extremely diversified model. But I guess regarding commercial real estate exposure, I know it's difficult to give an exact percentage of your exposure there. But just broadly speaking, we get asked all the time, what's Autodesk's exposure to the category. How should we think about kind of Autodesk in the CRE market? Andrew Anagnost: To be honest, you shouldn't, okay? This is some of the conversations we had during the housing crisis, like, how should we think about Autodesk relative to the housing. And the question is, you shouldn't, all right? The amount of things that need to be built and rebuilt in our customer base is ginormous, all right? They don't have current capacity, either people-wise, dollar-wise or capability-wise, to actually work through all the things that are going on. So the momentum of the industry pivots to other areas. Now even if you look at commercial real estate, people are still reconfiguring commercial real estate within the segment in order either to make it more attractive to a shrinking pool of renters or to repurpose that space to other uses. But in terms of exposure to Autodesk, you got to be careful about overblowing that because the money always goes somewhere else. There's always a lot of work to be done in other sectors. That just means that people that were traditionally bidding on commercial real estate projects are now bidding and engaging on other types of projects. Matt Hedberg: Super helpful. Thank you for that. Operator: Thank you. Our next question comes from the line of Bhavin Shah of Deutsche Bank. Bhavin Shah: Great. Thanks for taking my question. Andrew, we continue to hear good things from your customers and partners regarding your ability to innovate and enhance many of your acquired assets, whether it's Innovyze, PlanGrid, et cetera. Can you just remind us of your views on go-forward M&A and your M&A philosophy. And maybe kind of what are some of the lessons we learned from prior deals? Andrew Anagnost: Yes. So we are an acquisitive company. We will continue to be an acquisitive company. We always like when the environment gets more attractive for acquisitions, but we are always looking to make sure that a potential acquisition is strategically aligned with our priorities. That means that it's either accelerating an effort that we're currently working on or bringing us into an adjacency that we weren't working on but that we see as an attractive place. Timing matters as well in terms of what timing is right for us to do these things that we keep the business reasonably focused on the things that are important and don't try to juggle 18 balls at once, right? But we will continue to be acquisitive, and we have the cash flow and balance sheet ability here to do whatever we need to do in terms of strategic fit and expansion that we're interested in moving forward. So don't expect any change. In terms of learning, look, you always learn, you can integrate some of the back office faster, all right? There's a [indiscernible] and all these things is integrate sales and back office infrastructure quicker and you go faster. Bhavin Shah: Super helpful there. Just on another topic, can you just talk about what you're seeing with A&E customers as it relates to hiring. I know many of these customers have got talent shortages over the past few years. Are you seeing any easing here or any kind of other general commentary in terms of hiring within A&E customers. Thanks so much for taking my question. Andrew Anagnost: Yes. It depends on the sector. But honestly, in construction and manufacturing, you're seeing - they're still seeing challenges with hiring, right? It's one of the big things we hear from them is their ability to not only find but retain talent, especially qualified talent. So hiring continues to be an issue on the execution side of our customers, primarily towards the mix side. Operator: Thank you. Our next question comes from the line of Ken Wong of Oppenheimer & Company. Ken Wong: Great. Thank you for taking my question. Just a quick one for me. As we think about - I think Debbie, you mentioned new customer softness is kind of consistent with what you guys are seeing. But just wanted to make sure, relative to last quarter, I think you guys had called out a bit of an air pocket that normalized. How should we think about the way that played out this quarter in terms of adding new subs? Debbie Clifford: The overall market conditions, new subs, momentum in the business was similar to last quarter. We talked about leading indicators being consistent with last quarter, growing usage, record bid activity on BuildingConnected ,cautious optimism from our channel partners. Beyond that, I would just add that our regional performance was broadly similar to what we've seen for several quarters. direct business, including enterprise and eStore as well as India actually were bright spots for us, but they were offset by some tougher patches like China as well as the softer performance that we talked about in M&A. Ken Wong: Got it. And then I realize maybe it's a very small nuance. But I think last quarter, you guys saw a little bit of a dip, and then it recovered in terms of new sub ads. I guess when you're saying it's consistent with last quarter, would it be more consistent with that exit or kind of full quarter dynamic where averaged out maybe a little lighter than anticipated. Debbie Clifford: So remember what we said last quarter was that we saw a slight dip after we stopped selling the multiyear contracts upfronts, but then it recovered as we exited the quarter and as we got into early Q2, and we saw that consistently throughout Q2. Ken Wong: Okay. Perfect. Thank you, Debbie. Operator: Thank you. Please standby. Our next question comes from the line of Nay Soe Naing, Berenberg. Nay Soe Naing: Hi. Thank you for squeezing me in. Just got a quick question from me. Coming back to the early was better than expected or earlier than expected EBA renewals I was wondering if we were to exclude that impact in the quarter, the performance in AEC, would we have seen an inflection in terms of the growth levels because what we've seen in the past couple of quarters is the gradual decline in growth rates. So I was wondering if we didn't have this early renewals and EPAs would be an easy segment would have seen a further deceleration in growth rates? Or would we see a bit of an uptick compared to Q1? Thank you. Debbie Clifford: So the early billings that we talked about for EBAs are what drove the revenue beat versus our guide. But when you think about that beat on a dollar basis in comparison to the totality of our AEC business, the AEC business is vastly larger. So it's not a big driver of the overall trend that we're seeing in AEC, but it was the driver of EBA. Nay Soe Naing: Thank you. Operator: Thank you. Our next question comes from the line of Patrick Baumann of JPMorgan. Please go ahead, Patrick. Patrick Baumann: Thank you. This is Pat on for Steve. So just a couple probably for Debbie. You touched on sales in terms of the moving parts of the guide raise there. I guess in terms of the free cash flow midpoint, what was - I know it was only - it was a small number, but what was the driver of the raise there? And then on the EPS, the adjusted EPS guidance rate - raise, there's like $25 million of other income. Is that simply the benefit from the interest on cash that you mentioned in the preamble? Debbie Clifford: Yes. So starting with cash, it's due to the performance that we saw in Q2. So I talked a little bit earlier in this Q&A session about the EBA billings that we saw in Q2 as well as the favorable in core linearity. So those were drivers of the difference that you saw in our cash flow guidance. And then in terms of EPS, the other income is due to higher interest income from our cash balances. Patrick Baumann: Good. Does that flow through the cash flow? Debbie Clifford: In part, well, yes, yes. Patrick Baumann: Okay. And then sorry, one more on cash flow for my second question. Is the - do you think is the third quarter going to be negative or positive on free cash flow. You said I think, significantly weighted to the fourth quarter in the second half, which I think is similar to your prior commentary from last quarter. But I think you also thought at that time that maybe second quarter and third quarter could be negative. Is your view that free cash flow will be negative in the third quarter given the impact of this cash item that was pushed from the first half to the third quarter? Debbie Clifford: We're not going to guide on a quarterly basis for free cash flow, but I'll try to be helpful. I just want to reiterate some of the comments. So remember that second half free cash flow is going to be significantly weighted into the fourth quarter. And the biggest driver of that is the extension of our federal tax payments that had a positive impact on the first half but are going to negatively impact Q3. So think about that as you put your model together. Patrick Baumann: Okay. Thanks so much. Best of luck. Operator: Thank you. That is all the time we have for Q&A today. I would now like to turn the conference back to Simon Mays-Smith for closing remarks. Sir? Simon Mays-Smith: Thanks, and thank you, everyone, for joining today. We look forward to updating you on our progress in November on our Q3 earnings call. I look forward to speaking to you then. Thank you so much. Operator: This concludes today's conference call. Thank you for participating. You may now disconnect.
ADSK Ratings Summary
ADSK Quant Ranking
Related Analysis

Autodesk Inc. (NASDAQ:ADSK) Faces Mixed Sentiments Amid Analysts' Ratings

  • HSBC downgrades Autodesk Inc. (NASDAQ:ADSK) from "Buy" to "Hold" due to valuation and growth concerns.
  • Citi raises its price target for Autodesk to $361, highlighting the company's strong third-quarter billings as a sign of healthy revenue collection.
  • Autodesk's third-quarter results present a mixed bag, with uncertainty around fiscal year 2026 free cash flow targets and varied reactions to the new CFO appointment.

Autodesk Inc. (NASDAQ:ADSK) is a leading software company known for its design and engineering software, primarily used in architecture, engineering, construction, manufacturing, and media industries. The company faces competition from firms like Adobe and Dassault Systèmes. Recently, HSBC downgraded Autodesk from a "Buy" to a "Hold" rating, citing concerns about valuation and growth moderation. At the time, the stock price was around $291.98.

Despite HSBC's downgrade, Citi has shown confidence in Autodesk by raising its price target from $358 to $361 while maintaining a "Buy" rating. This decision comes after Autodesk's strong third-quarter performance, particularly in billings, which indicates healthy revenue collection. Citi's analyst views the recent dip in Autodesk's share price as a potential buying opportunity.

Autodesk's third-quarter results have been a mixed bag for investors. While the company has outperformed its peers in estimate revisions, there is some uncertainty regarding its fiscal year 2026 free cash flow targets. Additionally, the appointment of Janesh Moorjani as the new CFO has received varied reactions from investors, adding to the mixed sentiment.

Currently, Autodesk's stock is trading at $291.90, showing a slight increase of $1.26 or 0.43%. The stock has fluctuated between $289.03 and $292.62 today. Over the past year, it has seen a high of $326.62 and a low of $195.32, reflecting its volatility. Autodesk's market capitalization stands at approximately $62.76 billion, with a trading volume of 1,317,326 shares on the NASDAQ exchange.

Autodesk Shares Drop 7% Despite Narrow Q3 Earnings Beat and Revenue Growth

Autodesk (NASDAQ:ADSK) saw its shares decline by more than 7% in pre-market today after reporting third-quarter results that slightly exceeded expectations but failed to impress investors.

For the third quarter of fiscal 2025, the design software company posted adjusted earnings per share of $2.17, beating the Street consensus estimate of $2.12. Revenue rose 11% year-over-year to $1.57 billion, marginally surpassing analyst projections of $1.56 billion.

Autodesk issued mixed guidance for the fourth quarter. The company projected adjusted EPS in the range of $2.10 to $2.16, aligning closely with analyst expectations of $2.12. Revenue guidance of $1.623 billion to $1.638 billion placed the midpoint slightly above the consensus estimate of $1.62 billion.

The company faced headwinds, with its GAAP operating margin dropping by two percentage points to 22% and its non-GAAP operating margin declining by three percentage points to 36%. Autodesk's net revenue retention rate stayed within the 100% to 110% range on a constant currency basis, reflecting steady performance in retaining customers.

Autodesk, Inc. (NASDAQ:ADSK) Sees Positive Analyst Sentiment and Growth Potential

  • Analysts have raised the consensus price target for Autodesk, indicating a positive outlook on the company's future performance.
  • The transition to a subscription model is expected to provide long-term stability for Autodesk, despite short-term cash flow impacts.
  • Activist investor Starboard Value's involvement suggests potential operational enhancements and increased shareholder value, leveraging Autodesk's strong market position.

Autodesk, Inc. (NASDAQ:ADSK) is a leading software company known for its 3D design, engineering, and entertainment software and services. It serves various industries, including architecture, engineering, construction, and media. Autodesk competes with companies like Adobe and Dassault Systèmes. The company is transitioning to a subscription model, which is expected to provide long-term stability.

The consensus price target for Autodesk has shown a notable upward trend over the past year. Last month, the average price target was $330, indicating positive sentiment among analysts. This suggests potential growth and confidence in Autodesk's future performance. The stock price has increased by 27% year-to-date, reflecting this optimism.

Three months ago, the average price target was $300.62, marking a significant increase of nearly $30 in just a quarter. This reflects growing optimism about Autodesk's prospects. However, the company's stretched valuation and challenges from maintenance revenues and competition have caused some investors to remain cautious.

A year ago, the average price target stood at $287.59. Over the past year, the consensus price target has increased by approximately $42.41. Analyst Matthew Hedberg from RBC Capital has set a price target of $295, indicating confidence in Autodesk's potential to surpass quarterly earnings estimates.

Autodesk's transition to a subscription model and recent billing changes have impacted short-term cash flow. However, these changes are expected to provide long-term growth potential. Activist investor Starboard Value is pressuring Autodesk to enhance operations and increase shareholder value, highlighting the company's strong market position and potential in generative AI.

Autodesk, Inc. (NASDAQ:ADSK) Quarterly Earnings Preview

  • Analysts predict an EPS of $2.12, indicating a year-over-year increase of 1.9%.
  • Projected revenue for the quarter is approximately $1.56 billion, a 10.5% increase from the previous year.
  • Financial ratios such as a P/E ratio of 64.45 and a debt-to-equity ratio of 0.95 highlight Autodesk's market valuation and financial stability.

Autodesk, Inc. (NASDAQ:ADSK) is a leading software company known for its design and engineering software, widely used in industries like architecture, construction, and manufacturing. As it prepares to release its quarterly earnings on November 26, 2024, analysts are closely watching its financial performance. Autodesk competes with companies like Adobe and Dassault Systèmes in the software industry.

Wall Street analysts estimate Autodesk's earnings per share (EPS) to be $2.12 for the upcoming quarter. However, the company is expected to report an EPS of $2.11, reflecting a year-over-year increase of 1.9%. This slight difference in estimates highlights the importance of accurate earnings projections, as changes can significantly impact investor reactions, as highlighted by empirical studies.

Autodesk's projected revenue for the quarter is approximately $1.56 billion, marking a 10.5% increase compared to the same quarter last year. This growth indicates strong performance in its core markets. The company's price-to-sales ratio of 11.70 suggests that the market values Autodesk at nearly 12 times its annual sales, reflecting investor confidence in its revenue-generating capabilities.

Despite a high price-to-earnings (P/E) ratio of 64.45, Autodesk's earnings yield stands at 1.55%, providing a measure of return on investment. The enterprise value to sales ratio is slightly higher at 11.89, indicating the company's total valuation in relation to its sales. These metrics suggest that investors are optimistic about Autodesk's future growth prospects.

Autodesk's debt-to-equity ratio of 0.95 shows it has slightly less debt than equity, which is a positive sign for financial stability. However, the current ratio of 0.64 suggests potential challenges in covering short-term liabilities with short-term assets. This could be a point of concern for investors, as it may impact the company's liquidity position.

Morgan Stanley Reiterates Overweight on Autodesk, Raises Conviction in EPS Growth

Morgan Stanley analysts reiterated an Overweight rating on Autodesk (NASDAQ:ADSK) with a price target of $320 on the stock.

The analysts emphasized that Autodesk is Morgan Stanley's top pick, highlighting the company's potential for margin and EPS growth. Autodesk's shares are currently trading at a discount compared to both design software and larger software peers, despite improving fundamentals in areas such as free cash flow, revenue growth, and operating margins.

Following Autodesk's Q2 2025 results, where management emphasized their industry-leading GAAP margins, the analysts conducted an in-depth analysis of the company’s path to further margin expansion, go-to-market optimizations, and the impact of its new transaction model. The analysts believe these factors will drive EPS growth and position the company for multiple expansion, further solidifying Autodesk's strong risk/reward profile.

Deutsche Bank Adjusts Autodesk Inc. Rating to "Hold"

  • Autodesk's quarterly earnings for April 2024 showed a revenue of $1.42 billion, an 11.7% increase year-over-year, and an EPS rise to $1.87 from $1.55, surpassing Wall Street expectations.
  • The company has consistently outperformed consensus revenue and EPS estimates over the last four quarters, indicating strong financial resilience and operational efficiency.
  • Autodesk's focus on 3D AI technology and generative design technologies, along with its significant increase in remaining performance obligations, positions it well for future industry advancements.

Deutsche Bank's recent adjustment of its stance on Autodesk Inc. (NASDAQ:ADSK) to a "Hold" rating, as reported by StreetInsider, reflects a cautious yet observant perspective on the company's future performance. Autodesk, a leader in 3D design, engineering, and entertainment software, has shown a consistent ability to innovate and adapt to the evolving demands of the digital world. This adjustment comes at a time when Autodesk reported a notable increase in its quarterly earnings, showcasing the company's financial health and growth trajectory.

Autodesk's earnings for the quarter ending April 2024 were impressive, with revenue of $1.42 billion, marking an 11.7% increase over the previous year. This growth in revenue is a testament to Autodesk's strong market position and its ability to capitalize on the increasing demand for its software solutions. The company's earnings per share (EPS) also saw a significant rise to $1.87, up from $1.55 in the year-ago quarter, surpassing Wall Street expectations. Such financial metrics are crucial indicators of Autodesk's robust performance and its potential for sustained growth.

The company's ability to exceed analyst predictions, with both revenue and EPS beating the Zacks Consensus Estimate, underscores its operational efficiency and strategic initiatives. Autodesk has consistently outperformed consensus revenue and EPS estimates over the last four quarters, highlighting its financial resilience and the effectiveness of its business model. This trend of surpassing expectations is a positive signal for investors, indicating Autodesk's strong execution and potential for future success.

Operating within the competitive computer software industry, Autodesk's latest financial achievements demonstrate its sustained growth and ability to exceed market expectations. The company's focus on 3D AI technology and generative design technologies positions it well for future advancements in the industry. Autodesk's significant increase in its remaining performance obligations and its leadership in developing industry clouds and platforms for 3D AI products and services further solidify its market position.

Despite the recent decrease in its stock price, Autodesk's financial performance and strategic advancements indicate a promising outlook. The company's market capitalization and trading volume reflect its significance in the industry and investor interest in its growth potential. As Autodesk continues to innovate and expand its offerings, it remains a key player in the software industry, poised for continued success.

Autodesk, Inc. Quarterly Earnings Preview

  • Anticipated Earnings Report: Autodesk is expected to release its quarterly earnings on Thursday, June 13, 2024, with an EPS of $1.8  and projected revenue of $1.4 billion.
  • Q1 Performance: Autodesk reported Q1 revenue of $1.42 billion, an 11.7% increase year-over-year, surpassing both revenue and EPS estimates.
  • Market Position and Innovation: The company's focus on 3D AI and industry clouds has strengthened its market position, reflected in its stock performance and market capitalization of approximately $45.57 billion.

Autodesk, Inc. (NASDAQ:ADSK) is gearing up to release its quarterly earnings report on Thursday, June 13, 2024, after the market closes. The anticipation among investors and analysts is palpable, with Wall Street setting its sights on an earnings per share (EPS) of $1.8 and projecting the company's revenue for the quarter to be around $1.4 billion. Autodesk, a leader in 3D design, engineering, and entertainment software, has consistently demonstrated its ability to meet and exceed market expectations, making this upcoming earnings report a significant event for stakeholders.

In the first quarter ended April 2024, Autodesk reported revenue of $1.42 billion, marking an 11.7% increase over the same period last year. This performance not only surpassed the Zacks Consensus Estimate of $1.4 billion by a margin of 1.46% but also exceeded the anticipated EPS, coming in at $1.87 compared to the forecasted $1.78. This indicates robust financial health and operational efficiency, as the company managed to outperform analyst estimates on both top and bottom lines, a trend that investors hope will continue in the upcoming earnings report.

Autodesk's ability to consistently surpass expectations is a testament to its strong position within the Zacks Computer Software industry. The company's focus on innovation, particularly in 3D AI and industry clouds, has allowed it to maintain a competitive edge and sustain its growth trajectory. With a reported 12 percent increase in first-quarter revenue and a 12 percent year-over-year increase in current remaining performance obligations, Autodesk's strategic advancements in technology and business model evolution are clearly paying off.

The company's stock performance reflects its operational success, despite the fluctuations in the market. Currently trading at $211.5, Autodesk has seen its shares fluctuate between highs and lows, yet maintains a solid market capitalization of approximately $45.57 billion. This resilience in the stock market, coupled with the company's consistent financial performance, makes Autodesk a noteworthy entity in the eyes of investors and industry observers alike.

As the date of the earnings report approaches, all eyes will be on Autodesk to see if it can continue its streak of exceeding market expectations. The company's previous performance, characterized by significant growth in revenue and EPS, sets a high bar for the upcoming quarter. Investors and analysts alike will be keenly watching to see if Autodesk can maintain its momentum and further solidify its position as a leader in the software industry.